Need help with channel master feed horn

martinuk

martinuk

Regular Member
My Satellite Setup
1.2M Channel Master, C120 Invacom 0.3 LNB & Feedhorn, with Tm.Vbox &Technomate 5402HD
My Location
uk-stoke-on-trent
Hi guys got my channel master feedhorn in post this morning comes with white case to very posh anyways
wot lnb do i need for other half
Would a INVERTO C120 SINGLE 0.3DB LNB do ? or INVACOM TWIN 0.3DB TWH 031 LNB
 
Personally, I would go for the twin LNB as when the dish has moved to the correct position, I could swop round the cables to eliminate any signal loss through the motor.
 
Channel Hopper said:
Personally, I would go for the twin LNB as when the dish has moved to the correct position, I could swop round the cables to eliminate any signal loss through the motor.
Click to expand...
can do that with jack motor
 
martinuk said:
can do that with jack motor
Click to expand...

Your profile mentions a Dark motor though, are you using something else ?
 
I dont use the feed on my 1.2, I instead use an inverto black ultra twin lnb.
 
Right lads ive baught INVACOM SNF-031 'C120' 0.3dB Universal LNB for my cm feed horn, you know bolts that hold on feedhorn do they come with the lnb, god im missing loads bolts etc for this channel master if doesnt come with the lnb were can i get them from
 
I believe that they normally come with the LNB, else should easily be able to get from ebay, M4 I think they are.
 
I will be Interested to compare results from your Channel Master dish 1.2 - Invacom SNF 031 / Channel Master original feedhorn against Inverto Ultra Black
I think the long way energy travels through feedhorn/lnb lower signal level at the receiver - thats why results are usually better when using Inverto Ultra Black
also lnbs are behaving different In different bands and polarisations
 
Back
Top