New Fibo going up soon

CROSSBONES

CROSSBONES

Specialist Contributor
My Satellite Setup
1.2m channel master on a jeager 1224 motor. 55cm fibo Gregorian. VU solo2.
My Location
S.Wales
I've three 1.2 CMs in my sideway and two polarmounts in the garage, but I don't really want something that big. :)

I've had the Fibo for several months, got the motor coming, does the motor not come complete with the mount?
 
I've had the Fibo for several months, got the motor coming, does the motor not come complete with the mount?
Click to expand...

The motor does un bolt from the polar mount.

So there is a good chance your just getting the motor.

I know snuffer has polar mounts, as im buying one from him.

Didnt the polar mount come with the dish?
 
No, the dish has an AZEL mount on it. I'll check with Snuffer, and order one if the motor doesn't come with the polarmount. :)
 
The 90cm polar mount also fits the 55cm, but not the 1.2m:)
 
I'm going to move these few posts to the Fibo section, as it has hijacked Robbo's thread. :-lmao

I'd thought about the diseqC mod, but I've already got a V-Box in the garage begging to be used. :)
 
Very sorry Robbo:p
 
d thought about the diseqC mod, but I've already got a V-Box in the garage begging to be used
Click to expand...

But does it have the +5v?:)
 
Don't know will have a look later, I've never taken it out of the box. :-lmao
 
excellent rolfw, i've also enquired about a fibo dish as i can fit it straight to the jaeger 1224 motor i have ready

cant wait to see some pictures of it

on vbox's my doesn't have the +5 volts as its a standard jaeger vbox 2
 
rolf, if no +5v then you could use johnsatt`s reed mod in the fibo motor.

wod, you wont need the +5v if your going to use the 1224.
 
Ah I see, it needs +5 for the optical sensor.

Just checked, it's a Superjack V-Box II, no +5v
 
I bought one and chucked it on my Moteck late last year. Very pleased with it. Using a White Tech twin. Will be interested to hear how you find it.
 
Read this and a little suprise do not change the motor but the VBOX
I have a modification for it so you can take that 5 Volts out of that box in 15 minuts.

Step 1
Close to the processor there are a jumper called JP3 This is 5 Volts solder a wire and make it outsite or with a nice connection (its 5 V + so becare full not touch the alu)
Step 2
Resitand R3 next to the relais are 3300 Ohm remove it for a wire direct (no restand) and ready are the box with 5 Volts.


Rolfw no the mount is not there its only a motor and the 120 mount is not the same as 99Cm i will look of there is a 120 cm somewhere perhaps in a corner.

P.s sorry for bad English bud i hope you untherstand the Modification for it.
Plaese let me know of you have don it THX
 
It's a 90cm Snuffer, if you find one, let me know how much it is. :)
 
ok a 90 Cm polar mount i go look for it just sold one to Crosbones but don't worry must be found somewhere in warehouse haha.

Ron
 
Is the original 1.2 mtr polar mount better than the one which came later on???

Summer's coming and I am getting all geared to sort out my Fibo, once and for all..
 
You can sell the polar mount to rolf snuffer, its fine, as It was for my 55cm Fibo, but I will just mount it on a disec motor.;)
 
Back
Top