WORKING 100% MATRIX MAGIG AND A LOT OF RECEIVERS
Multi Emulator for sidsa based modules and receivers (Xtreme, @sat, magic module, matrix etc.)
This program emulates conax and S*ca2, it's a standalone emulation and does not support any type of card.
It's mostly for people who have an emulation firmware where conax/S*ca2 is not included, for example
in my case, the @sat emu-firmware running in an xtreme str.
Installation:
- Remove any card from the module/receiver.
- Clear the flash.
- Write MultiEmu.bin to the flash, starting from address 0.
- Restart the receiver or plugin the module.
Known issues:
- When switching to a conax channel, it takes about 5 seconds before the first picture starts,
this is due to the decryption algorithm, I have a few ideas, so this might be better in a next version.
- During decoding of a conax channel, the MultiEmu menu acts very slow, same problem.
- I don't know yet how to write to the flash directly from the program, so every time
you turn on the receiver, you have to upload the latest keys in case they have changed.
Key updates:
- Currently there is no auto-update, need some extra information for that :-)
Updating keys is possible through a simple smartcard and the me_upd program,
put me_upd.hex in the flash of the smartcard and the keys in the internal eeprom,
read the me_upd.txt file for information.
Put the smartcard in the module/receiver and the keys will be uploaded.
Known bugs:
none :-)
Thanx to all the great guys/girls who took so much effort in investigating the matters and solving it.
English section also.
!!!
to all please the file here is not supporting any card and there no menu to add
a new keys and also is not supporting other encryption like viaccess nagra...
so before you upgrade your cam think you will lose all others encryptions and also is not working with echostar receivers
History:
Version 0.3.4
- Release version
LOAD WITH CASE INTERFACE ONLY BIN FILE WILL BE OK!
(File cannot be uploaded here, PM for file)
many thanks to alsat team
Multi Emulator for sidsa based modules and receivers (Xtreme, @sat, magic module, matrix etc.)
This program emulates conax and S*ca2, it's a standalone emulation and does not support any type of card.
It's mostly for people who have an emulation firmware where conax/S*ca2 is not included, for example
in my case, the @sat emu-firmware running in an xtreme str.
Installation:
- Remove any card from the module/receiver.
- Clear the flash.
- Write MultiEmu.bin to the flash, starting from address 0.
- Restart the receiver or plugin the module.
Known issues:
- When switching to a conax channel, it takes about 5 seconds before the first picture starts,
this is due to the decryption algorithm, I have a few ideas, so this might be better in a next version.
- During decoding of a conax channel, the MultiEmu menu acts very slow, same problem.
- I don't know yet how to write to the flash directly from the program, so every time
you turn on the receiver, you have to upload the latest keys in case they have changed.
Key updates:
- Currently there is no auto-update, need some extra information for that :-)
Updating keys is possible through a simple smartcard and the me_upd program,
put me_upd.hex in the flash of the smartcard and the keys in the internal eeprom,
read the me_upd.txt file for information.
Put the smartcard in the module/receiver and the keys will be uploaded.
Known bugs:
none :-)
Thanx to all the great guys/girls who took so much effort in investigating the matters and solving it.
English section also.
!!!
to all please the file here is not supporting any card and there no menu to add
a new keys and also is not supporting other encryption like viaccess nagra...
so before you upgrade your cam think you will lose all others encryptions and also is not working with echostar receivers
History:
Version 0.3.4
- Release version
LOAD WITH CASE INTERFACE ONLY BIN FILE WILL BE OK!
(File cannot be uploaded here, PM for file)
many thanks to alsat team