Just Sharing This New multi-stream @ 30 west

jeallen01 said:
Also noted (rather weirdly?) that the SS doesn't change much at all from about 70% when I switch between the 1.2m Gibby and the off-set LNB on the Zone 2 dish - I would have thought that it would change quite a lot.
Click to expand...


AGC?
 
Lazarus said:
As per JE's advice, scan anyway - and be patient. The whole exercise is counter-intuitive.

PS I'm also using modified .62
Click to expand...
Counter-Intuive it is! But yes, Finaly thanks to your advice and jeallen01's advice it dit work!

The Tv and Radio channels did show after a while!

Thanks! :-D
 
Do you guys also have a clue on how to receive "TV castilla La Mancha" and TPA on 11491V and 11496V ? I thought to be clever and use the same trick for those transponders but neither of them work.
 
Stevenvc19 said:
Do you guys also have a clue on how to receive "TV castilla La Mancha" and TPA on 11491V and 11496V ? I thought to be clever and use the same trick for those transponders but neither of them work.
Click to expand...


Nope! Now you're on a roll, you tell us :D
 
Stevenvc19 said:
Do you guys also have a clue on how to receive "TV castilla La Mancha" and TPA on 11491V and 11496V ? I thought to be clever and use the same trick for those transponders but neither of them work.
Click to expand...
Just checked those frequencies and got those channels & more on the SX88 - make certain you have set the correct SRs for both lots (see here) and try again
 
jeallen01 said:
Just checked those frequencies and got those channels & more on the SX88 - make certain you have set the correct SRs for both lots (see here) and try again
Click to expand...

Still no joy for me - but I'll quit while I'm ahead (with Aragon)!
 
The Aragon TP works fine with these parameters on Silabs tuners, but except CLM, Aragon and Asturias are low powered TPs. I have 12.2db on Aragon, while 16db on CLM, so you can figure it out that in small dishes and depending on your region it won't go that easily...
125849
 
MCelliotG said:
The Aragon TP works fine with these parameters on Silabs tuners, but except CLM, Aragon and Asturias are low powered TPs. I have 12.2db on Aragon, while 16db on CLM, so you can figure it out that in small dishes and depending on your region it won't go that easily...
Click to expand...
That makes a lot of sense because both the SX88 & 88+ display the Aragon channels and those low power channels with the 1.25m Gibby, but completely lose the low power ones (no sign of any signals) with the reasonably well aimed Zone 2 whilst still getting the Aragon ones.
 
MCelliotG said:
The Aragon TP works fine with these parameters on Silabs tuners, but except CLM, Aragon and Asturias are low powered TPs. I have 12.2db on Aragon, while 16db on CLM, so you can figure it out that in small dishes and depending on your region it won't go that easily...
View attachment 125849
Click to expand...

What receiver is the screenshot from please ?
 
MCelliotG said:
HD51, OpenATV 6.3 with my skin on of course.... lol
Click to expand...

Ah nice so this would work also with Octagon SF8008 running OpenATV 6.3 ?
 
In short... yes!
 
good signal at this end using Triax TD110 1.1m dish, Inverto Black Ultra LNB & Mut@nt HD51 however as soon as it rains its gone, transponder seems very temperamental
 

Attachments

  • IMG_20190912_093630.webp
    IMG_20190912_093630.webp
    117.8 KB · Views: 36
Nice, you could switch SNR to db though, so we could see the margin in detail!
 
Where is on the menu what you say above and how do I get video and audio bitrate information in the bar?
 
We are going off topic here but:
For SNR in db from the Usage & GUI - OSD settings
01.snrdb.webp

For bitrate info, install bitrate plugin from the feed and adjust these settings
02.bitrates.webp

OK, now let's get back on topic! :p
 

Attachments

  • IMG_20190912_155445.webp
    IMG_20190912_155445.webp
    142.7 KB · Views: 29
Back
Top