New multistream on 9° east with sr 47100 and 16apsk

[stephan94]

Hallo
New multistream
9° east
12466 V 47100 16APSK
MIS1 MIS2 MIS3 MIS4 MIS5
root 8 or Gold 262140

 

[MCelliotG]

HD51 cannot resolve this (no signal), while Osmio4K can with 12.5db signal!

Can anyone try it on SF8008?

 

[stephan94]

with 9.8 dB it already works with the MIO4K (see the higher image)
It is possible that the problem is not the signal but the 16 APSK + the SR 47100

 

[LeBelge]

These are encrypted

Premium Cinema
Premium Energy
Premium Comedy

the others work fine on my Primo.

 

[Channel Hopper]

HD51 cannot resolve this (no signal), while Osmio4K can with 12.5db signal!

Can anyone try it on SF8008?

Will move dish over tomorrow morning.

 

[cardiff]

It works fine on SF8008 with 12.8 db

 

[sat-tv-fan]

All very strange, I get something showing but not video with ebs pro but it shows a SR rate of 29900 in signal analyser, my SX88+ a strong signal with 29900 but nothing with 47100 ?

 

[MCelliotG]

It works fine on SF8008 with 12.8 db

So, on HD51 with the same tuner, not locking this TP is simply a firmware limitation....

 

[stephan94]

unfortunately does not work with the "old" Octagon SF 4008

 

[sat-tv-fan]

Seems I will order an 8008 today then !

 

[cardiff]

MIS 5 on Octagon SF 8008

 

[sat-tv-fan]

How quick is the blindscan on the 8008 compared to the technomate HD 5402 ?

 

[sat-tv-fan]

unfortunately does not work with the "old" Octagon SF 4008

Are your screenshots from the 8008 using a different skin ?

 

[Channel Hopper]

My system did not resolve the new frequency with the blindscan or manual scan.

The default symbol rate setting on blindscan is 1-45 so this needs to be expanded to 50 to capture the new frequency.

Blindscan on the 8008 here (which has firmware from out of the box - 6 months old) is around 8 minutes on 9E, approximately six minutes to search the four polarities and two more to scan and compile the full channel list.

So, I will update in a few minutes and try again.

 

[sat-tv-fan]

if it's a SR of 47100 why do I get a lock with 29900 ?

 

[Channel Hopper]

if it's a SR of 47100 why do I get a lock with 29900 ?View attachment 126210

You have scanned with 8PSK setting.

 

[sat-tv-fan]

You have scanned with 8PSK setting.

Erm how do I not ?

 

[Channel Hopper]

The orinal post mentioned a 16PSK for the higher SR stream

 

[stephan94]

Are your screenshots from the 8008 using a different skin ?

I do not have an 8008, I have an Edision MIO4K
the blindscan was made with the MIO and the first post represents edision screenshots.
so far I do not think the 8008 can find the PLS with the blindscan.

 

[Channel Hopper]

New SF8008 firmware has made no difference to the detection, though the menus are now somewhat unfamiliar.