jdickson
Member
- Joined
- Feb 21, 2008
- Messages
- 2
- Reaction score
- 0
- Points
- 0
- Age
- 63
- My Satellite Setup
- 1.8m offset dish,Grundig GDS3000 reciever
- My Location
- Paros,greece
Unfortnately I recently had a fire which wiped out my old Grundig 3000 and melted my card. So I ordered a new card from Sky & purchased a new Sky+ box (Pace TDS 470N from a dealer on e-bay.
I live on a Greek island so have a 180cm dish from which I used to get good reception and the new box indicates reasonably good signal strength & quality - however when I set up the new box and card I keep getting the message "No Transponder Found". I have tried going into the installers menu and changed things but I keep getting the same message no matter what.
So - any ideas ? I only have one cable from the LNB is this a problem ? Do Sky have to marry the card to the box ?
I am at my wits end - any help or ideas would be appreciated.
I live on a Greek island so have a 180cm dish from which I used to get good reception and the new box indicates reasonably good signal strength & quality - however when I set up the new box and card I keep getting the message "No Transponder Found". I have tried going into the installers menu and changed things but I keep getting the same message no matter what.
So - any ideas ? I only have one cable from the LNB is this a problem ? Do Sky have to marry the card to the box ?
I am at my wits end - any help or ideas would be appreciated.