newbies guide how to program matrix with a cas 2

stevo

Regular Member
Messages
203
Likes
0
My Satellite Setup
dreamboxhd 800 pvr
2 x dreambox 500s
globalstar-m6 free to air
1 metre dish
80cm dish
60 cm dish
all via diqsec switch.
My Location
england
#1
first download and unzip the drivers & then install the studio.
insert cam into cas 2.
press connect---(contents of cam will be read)
press erase all---(takes a few minutes)
press open file-and browse for prevoisly downloaded bin file.
this will open file into cas 2.
press write in the box on the right hand side-this will take about 5 minutes.
after its writen press-verify to make sure its ok.
do not touch xilinx file

HOPE THIS HELPS

stevo
 

neilli.p

Regular Member
Messages
29
Likes
0
#2
Thanks for that Stevo.

Anyone got a quickie quide for prgramming a dragon cam
with a dragon loader card (fun7) and CAS2??
I know theres 2 diff ways, 1:with funldr7.exe 2:dragon loader file

I don't really know how to perform either, I got a dragon cam for my uncle
and need to program it for him..

HJad a look in the older threads...maybe I missed it sorry:-ohmy


stevo said:
first download and unzip the drivers & then install the studio.
insert cam into cas 2.
press connect---(contents of cam will be read)
press erase all---(takes a few minutes)
press open file-and browse for prevoisly downloaded bin file.
this will open file into cas 2.
press write in the box on the right hand side-this will take about 5 minutes.
after its writen press-verify to make sure its ok.
do not touch xilinx file

HOPE THIS HELPS

stevo
 
Top