stevo
Regular Member
- Joined
- Apr 2, 2004
- Messages
- 203
- Reaction score
- 0
- Points
- 16
- Age
- 54
- My Satellite Setup
-
dreamboxhd 800 pvr
2 x dreambox 500s
globalstar-m6 free to air
1 metre dish
80cm dish
60 cm dish
all via diqsec switch.
- My Location
- england
first download and unzip the drivers & then install the studio.
insert cam into cas 2.
press connect---(contents of cam will be read)
press erase all---(takes a few minutes)
press open file-and browse for prevoisly downloaded bin file.
this will open file into cas 2.
press write in the box on the right hand side-this will take about 5 minutes.
after its writen press-verify to make sure its ok.
do not touch xilinx file
HOPE THIS HELPS
stevo
insert cam into cas 2.
press connect---(contents of cam will be read)
press erase all---(takes a few minutes)
press open file-and browse for prevoisly downloaded bin file.
this will open file into cas 2.
press write in the box on the right hand side-this will take about 5 minutes.
after its writen press-verify to make sure its ok.
do not touch xilinx file
HOPE THIS HELPS
stevo