No Voltage LNB DM7020-s

C

Chris Wordsworth

Member
My Satellite Setup
P III Suse 10.2
P IV XpPro Sp3
Dreambox dm7020-s
My Location
South Africa
Please can anybody help?

I have a dm7020-s that has no voltage to the LNB in connector.
Have repeatedly tried to get Schematics from DMM but they are reluctant to part with same.Where can I find Schematics and block diags, or where to look for fault.
Thanking the community in anticipation.

Chris Wordsworth:-worship
 
Chris Wordsworth said:
Please can anybody help?

I have a dm7020-s that has no voltage to the LNB in connector.
Have repeatedly tried to get Schematics from DMM but they are reluctant to part with same.Where can I find Schematics and block diags, or where to look for fault.
Thanking the community in anticipation.

Chris Wordsworth:-worship
Click to expand...

The obvious place to start with would be with the tuner, unless you have already checked it and looking for other possibilities.
Would be interesting to see if you get the schematics, but I don't think that they will part with them.
 
There could be a safe that is blowned

Open it up and check
 
No Tuners fine !

I got a reply from DMM saying there could be many reasons for no voltage.
but no help where to look or even test points.
 
There's no voltage leaving the Dreambox? Have you changed the LNB settings at all?
 
Well I've done a system reboot and three front panel buttons. On quick look didn't see any parameters to set for LNB
 
Back
Top