NOW you can turn your receive super to ultra enter here

jack0

Regular Member
Messages
189
Likes
0
My Satellite Setup
STARCOM X550D SUPER
HW:9.6
LOADER:2.0
My Location
SYRIA
#1
Special thanks to PROF arz008 from syria how give the effort and a lot of these info
so thank him

______________________________________________________________
First:Turn TO ULTRA

now and only from 23 12 2005
you can turn your receive super to ultra WITH VERSION 314 ONLY OF ULTRA. VERSION 319 320 321 322 OF ULTRA NOT WORKING ON SUPER

very important :you can't use sw v319 320 321 of ultra on other receiver than ultra it self heres.
only sw v314 of ultra can be used on other sw than ultra


the right way is:

1.first load file called"ID TRUMAN"
2.secound load this version only of software ultra v314

what is "ID TRUMAN" software file and why you need it?
its a cleaner erase protocol&prevent protocol error which mean prevent the refues to new protocol& its safe tested software this is safefull and tested procedure done as the first step to change your software model to other kind such as from starcom to bright model or sonysat etc.

starcom 550 super = starcom 550 ultra v314 only = TRUMAN 100
starcom 650 super = starcom 650 ultra v314 only = TRUMAN 200
starcom 3100 super = starcom 3100 ultra v314 only = TRUMAN PLatinum
starcom 3200 super = starcom 3200 ultra v314 only = TRUMAN diamond
starcom 3500 super = starcom 3500 ultra v314 only = TRUMAN Gold

here ID TRUMAN file:


here starcom 550 ultra software V314:



here starcom 650 ultra software V314:


here
starcom 3100 ultra software V314:

here
starcom 3200 ultra software V314:

here
starcom 3500 ultra software V314:

:-Cbigsmil :-Cbigsmil :-Cbigsmil
________________________________________________________________[/B][/COLOR]

Secon:Change Your Current SW model:

here is a list of similar receiver software with different names and shapesbut have the same hardware so you can load software of every one of them on the another
change from one to the equal

1.first: load file :"ID TRUMAN"
2.second :load any of these similar software on your device as follows

starcom 550super = starcom 550 ultra v314 only = sonysat 9500 = sonysat 9000 plus any version = truman 100 = bright 4200 = micro-x mdr 4500 = magic 2004 = D-box DB-8800

starcom 650super = starcom 650 ultra v314 only = sonysat 9800 plus any version = truman200 = bright4400


here the file ID TRUMAN:
http://www.sendspace.com/file/6wq11b

here the official web sites:
starcom

sonysat

truman

micro-x

BRIGHT

:-Cbigsmil
________________________________________________________________

EXAMPLES

here an example to change starcom 550 & 650 super to bright 4200 & 4400: V324 DATE 25/03/2006 OPEN (POLSAT D+)Autoupdate for polsat & D+ which mean u don't need to enter the new keys daily
just stay on a channel from the package and wait for between 30sec to 3 minute then go out to another channel from out the package then go back to adifferent channel from the package stay little then all will open
and this is done evert time channel closed
TV CABO MEDIAPARK is OK etc


starcom 550 super = bright 4200
starcom 650 super = bright 4400


version 324date 25/03/2006


first load the "ID TRUMAN file":
http://www.sendspace.com/file/6wq11b

SECOND LOAD THE SOFTWARE BRIGHT AS SHOWEN :
starcom 550 super = bright 4200
starcom 650 super = bright 4400



very important:
to activate decoding on bright sw u should
press menu
then parental lock press ok
then enter 3453
then press menu
now decoding works


the latest software for BRIGHT:
1.autoupdate for POLSAT on hotbird satellite
2.and also open digital+ package : taquilla on astra & hispa satellite

IT TESTED AND WORK WELL

for starcom 550 and 650
turned and enjoy


:-Welcome1 :-Welcome1
:-Cbigsmil
________________________________________________________________


another example is turn starcom 550 super to sonysat 9500 V324 DATE 25 03 2006:

the method is by first load file called ID TRUMAN

second load the apropriate software file:
sonysat 9500 = starcom 550 super


here the file:ID TRUMAN
http://www.sendspace.com/file/6wq11b

and here the software sonysat 9500 v324 date:25/03/2006:
why upload "ID TRUMAN" first?
this is safefull and tested procedure done as the first step to change your software model to other kind such as from starcom to bright model or sonysat

the most beatifull is starcom 550 ultra but sonysat 9500 excactly the wonderfull and is the one which avaliable at tjis moment with the latest version v324 date 25/03/2006 mean today
test it and you will like it
i now use sonysat 9500 and hope you used too
take fun&enjoy

ofcours yoy can turned starcom 650 to sonysat 9800 v324 date 25/03/2006 today by the same way and steps

and here is software sonysat 9800 starcom650 super=sonysat9800 plus


:-Welcome1 :-Welcome1
:-Cbigsmil
________________________________________________________________

turn TRUMAN 100 to BRIGHT 4200:
tow steps only my dear friend:
1.load software :ID TRUMAN
2.load software :BRIGHT 4200 V324DATE 25 03 2006


BRIGHT 4200 is a very beatifull eyes catching soft whereas starcom 550 super is not beatifull
BRIGHT 4200 software v324 open D+ bouquets tested on hispa satellite
open polsat also
:-Welcome1 :-Welcome1
:-Cbigsmil
________________________________________________________________

turn magic 2004 to BRIGHT 4200:
tow steps only my dear friend:
1.load software :ID TRUMAN
2.load software :BRIGHT 4200 V324 DATE 25 03 2006



:-Welcome1 :-Welcome1
:-Cbigsmil
**************************************************
turn magic 2004 a complete exapline example:
receiver magic have a commerical name magic 2004 & there is a different receiver magic 2003 also having a different hardware , but in reality the receivers magic don't have an independent softwares,
the manufacturing company magic it self uses the softwares of another company such as starsat, it doesn't programming a software for its product & so goes on with name DB D-BOX 8800 .
so when you make up your mind you may be see the software installed in your receiver is indeed the software of starsat 550 super..

and the company of TRUMAN developing a software to allow changing to be right without problems & facing the issue of protocol refuse which i will explain later.this softwre call "ID TRUMAN"


the informations value of your receiver is :

1.software "SW" version which indicate the current using software & changing according to used software.the number of sw is the latest three number only.so newest sw is updated which mean changed time aftar time so uou can desigen many sw for one hardware

2.loader version which indicate the loader using for upload sw usually 2.0 & don't changing . there is tow loader "simple upload" usually attach to sw file & "IRD TOOL 2M=August_26,Tools" used for upload sw and pictures ,these loaders are tools not a sw and there versions currently don't changed.

3.the most important is hardware"HW" version which is 9.6 for all following receivers:

HARDWARE 9.6 = starcom 550 super = starcom 550 ultra = sonysat 9500 = sonysat 9000 plus= truman 100 = bright 4200 = micro-x mdr 4500 = magic 2004 = D-box DB-8800

all these receivers"STB" have the same physical part


there is a golden rule in receiver world says:
you can install any software on your receiver if it have the same hardware"HW" version as of your receiver have,
only hardware version matching is needed for using any softwre on your receiver so this answare your question :Is turning it"magic2004 to Sonysat or Other clone, available for any version of my Magic 2004 ? & there is a long list of matching receivers i will attach it in the end.note:somtimes different hw numbers indicating the same physical part but this is not what we are talking about.

back to our issue turning STB to another similar STB which realy meaning change sw only

i said company TRUMAN developing a software to allow this changing to be right without problems & facing the issue of protocol refuse which i will explain now.this softwre call "ID TRUMAN".
what happen when you try to install other sw family different from current used sw?
you will recive message says:Invalid Protocol which mean the new protocol is refused .
to overcome this problem you should use transitory sw "ID TRUMAN"
its a cleaner erase protocol&prevent protocol error which mean prevent the refues to new protocol& its safe tested software this is safefull and tested procedure done as the first step to change your software model to other kind such as from super to ultra ,from starcom to bright model or sonysat etc.

when you try upload sw "ID TRUMAN" at the first time and after recive message Waiting baboo and press ok you may be recive message "Invalid Protocol" but but here continue trying upload it when the STB is on ,not in "standby mode = in the beging of booting when the receiver is plug to electricity and at which the version of sw is showing for example 233"
continue try upload it untill it accepted and completly uploaded=the window saying ok is apper & the STB screen show 100 and booting goes on automaticaly and the number 225 is showing then screen shows letters

after success uploading of "ID TRUMAN"

its the time to upload any selected sw model starsat, truman, sonysat ,bright
choose a one corresponding to your needed"review page one" and upload it

mine"magic2004" has never been upgrated before.
you need cable :2x3 3x2 5x5 as showen in this link:

http://www.satdw.com/downloads/CABLE_PIN_CONECTION.zip

________________________________________________________________


notes:
1. for starcom super to ultra and inverse you can directly LOAD software of each one on the other without UPLOAD file ID TRUMAN first

2.magic & D-box are commecical names don't have a real software and depend on the others software
all these softwares tested each one on another and work well


:-Welcome1 :-Welcome1
:-Cbigsmil
________________________________________________________________


here is all program avaliable for
receiver family:
"super and ultra 550 650 3100 3200 3500 560"


1.loader software & picture only:
IDR TOOL 1.009 KB
AUGUST_26_TOOLS

2.CHANNEL send & upload & editor
PC EDITOR V 1.0 10073.97KB
PC EDITOR
no tool untill now for
1.code upload"softcam" or
2.software upload from stb to computer


:-Welcome1 :-Welcome1
:-Cbigsmil
*********************************************************


here a list of starcom software official web site:

http://www.satdw.com the best&newest software
http://www.satsw.com
http://www.satsw.net/index.php need register
http://www.satsw.org/index.php need register
http://www.swdw.net need register
_http://www.star-sat.com/indexflash.html

**********************************
other website for starcom:
http://www.euro-star.com.gr/download.php?cat=21
http://www.avaralar.biz/depo/index....rder=&directory=RECEIVER FIRMWARE EMU/STARSAT
http://www.koolpages.com/starcom/
http://www.mavitunasat.net/index.ph...ic_downloads/DIGITAL UYDU YAZILIMLARI/STARSAT
http://www.mavitunasat.net/index.ph...20YAZILIMLARI/STARSAT/Emu%20yaz%FDl%FDmlar%FD
http://www.uploadmaster.net/index.p...irection=0&order=&directory=STARSAT RECEIVERS


:-Welcome1 :-Welcome1
:-Cbigsmil
****************************************************************************************************


here websites for bright:
[urlhttp://www.brightuydu.tr.gs/[/url]

http://www.brightuydu.gen.ms

http://65.75.149.180/index.php?PHPS...=0&order=&directory=RECEIVER SOFTWARE/BRIGHT

http://www.mavitunasat.net/index.ph...Dl%FDmlar%FD/bright%20emu%20yaz%FDl%FDmlar%FD


:-Welcome1 :-Welcome1
:-Cbigsmil
****************************************************************************************************

NOW new sw for starsat & similars with version 321 date 4 03 2006 IN TRUMAN FORMAT
1.OPEN D+ on hispa & astra satellites
2.open NAGRA 2 ch :TV CABO MEDIAPARK etc

first load file ID TRUMAN
then the appropriate sw:

starcom 550 super = TRUMAN 100

starcom 650 super = TRUMAN 200

starcom 3100 super = TRUMAN PLatinum

starcom 3200 super = TRUMAN diamond

starcom 3200 super = TRUMAN Gold


VERY IMPORTANT:
to let decode work
press menu
go to last line parental lock and press ok
for serial number press 2 9 5 8
then press menu then go out
now coded chanell works and code option apper

________________________________________________________________

Here the latest software v322 date 14/03/2006 for ultra devices open D+ TV CABO MEDIAPARK NAGRA2 etc
its in super format for ultra stb called "ULTRA_S"
working only on ultra stb


X550D_V322_ultra_s


SR-X650CI_V322_ULTRA_s


SR-X3100CU_V322_ultra_s

SR-X3200CU_V322_ultra_s

SR-X3500CUCI_V322_ultra_s

SR-X560VFD_V322_ultra_s

********************************************************


very important :you can't use sw v319 of ultra on other receiver than ultra it self heres.
only sw v314 of ultra can be used on other sw than ultra


here the latest software for starcom ultra v322:
1. open NAGRA2 packages TV CABO MEDIAPARK
2.and also open : D+
taquilla[/COLOR] on astra & hispa satellite
3.open polsat by enter the daily new keys by remonte as will mentioned
the softwares:
ULTRA
SR-X550D_V322_ULTRA

SR-X650CI_V322_ULTRA

SR-X3100CU_V322_ULTRA

SR-X3200CU_V322_ULTRA

SR-X3500CUCI_V322_ULTRA

SR-X560D_V322_ULTRA

and here super sw v321 don't open polsat yet but open D+
SUPER
SR-X550D_V321_super

SR-X650CI_V321_super

SR-X3100CU_V321_super

SR-X3200CU_V321_super

SR-X3500CUCI_V321_super


STARSAT 560 SUPER V319:
http://www.satdw.com/downloads/group2/7- SR-X560D/2000127_silver_a2_SR-X560D_SUPER_V319.zip


:-Welcome1 :-Welcome1
:-Cbigsmil
*********************************************************

here the latest software for BRIGHT:
1.open NAGRA2 TVCABO MEDIAPARK
2.Autoupdate for polsat & D+:which mean u don't need to enter the new keys daily
just stay on a channel from the package and wait for between 30sec to 3 minute then go out to another channel from out the package then go back to adifferent channel from the package stay little then all will open
and this is done evert time channel closed
on astra & hispa satellite


BRIGHT 4200 V324 DATE 25/03/2006

BRIGHT 4400
V324 DATE 25/03/2006



very important:
to activate decoding on bright sw u should
press menu
then parental lock press ok
then enter 3453
then press menu
now decoding works



:-Welcome1 :-Welcome1
:-Cbigsmil

*************************************************
now new sw v324 25 03 2006 for starsat device in sonysat format OPEN POLSAT D+ directly by autoupdate:

DSR-9000 FTA PLUS VER 324 25 03 2006

DSR-9500 FTA VER 324 25 03 2006

DSR-9800 2CI PLUS VER 324 25 03 2006

Autoupdate for polsat & D+:which mean u don't need to enter the new keys daily
just stay on a channel from the package and wait for between 30sec to 3 minute then go out to another channel from out the package then go back to adifferent channel from the package stay little then all will open
and this is done evert time channel closed


good luck

_______________________________________________________________
VERY IMPORTANT:
1.To be able to OPEN POLSAT & others U SHOULD USE SW WITH VERSIONS 322 OR 323 OR AFTER it 324 325
older versions before 322 such as 321 etc cann't open polsat anyway

2.cause keys of POLSAT & TPS changes approximatly daily & and keys of D+ changes frome times to times,
u should enter latest up to date new keys after loaded valid sw by remonte control unless u are using autoupdate sw such as 324

_______________________________________________________________

How to enter new keys of POLSAT ,D+(taquilla), TPS(Multivision) by remonte control?(I will explaine every details)
1.enter codes menu(methode varies accoreding to used sw)(i will mention it all)
2.choose encryption type(NAGRA VIACCESS etc)(I 'ill tell u what to choose).
3.choose the right provider(four digit= XXXX)(i will explain it)
4.choose the right index(tow digit = XX) in its line u will input the new keys.
5. enter the new keys(16 digits for one index line)

_______________________________________________________________
1.How to enter codes menu?
according to the type of used sw u should do the following:
***************************************************
for STARSAT SUPER = STARCOM SUPER SW:
Press____menu____installition____last line = input code press OK.
***************************************************
for starsat ULTRA SW"
Press______menu____ press digit 1 2 3 4 & will appeare.
***************************************************
for sony sat 9000 plus & 9800 plus SW:
Press____menu____installation_____last line = input code press OK.
***************************************************
for sonysat 9500 SW:
Press______menu____ press digit 1 2 3 4 & will appeare.
***************************************************
for TRUMAN SW:
to enter code menu & activate decoding:
Press____menu____lest line = Parental control press OK____enter digit 2 9 5 8 then press menu the code option will appear and decoding begin
***************************************************
for Bright & Micro-x SW:
to enter code menu & activate decoding:
Press____menu____lest line = Parental control press OK____enter digit 3 5 4 3 then press menu the code option will appear and decoding begin

________________________________________________________________

2.choosing the right encryption type:
encryption types are:
-Betacrypt, Irdeto, Seca, VIACCESS, NAGRVISION, CONAX,BISS,NDS.POWRVIEW,SHL,etc.
-choosing the encryption type depend on Package u chooseed.
For POLSAT DIDITAL+ TV CABO MEDIAPARKE:is NAGRVISION
For TPS :is VIACCESS.
________________________________________________________________

3.choose the right provider(four digit= XXXX):
EACH Package have special providers:
for POLSAT:7001 OR 7101
for TV CABO:4801 OR 4901
for DIGITAL+:4001 OR 4101
for MEDIAPARKE:1811 OR 1911
for TPS: 007C00

________________________________________________________________

4.choose the right index(tow digit = XX):
I.FOR POLSAT DIGITAL+ TV CABO MEDIAPARKE There is indexs refer to NGRA1 & NAGRA2:
NAGRA 1: indexs are:00 & 01 now don't change.
NAGRA 2: indexs are depend on Provider:
for first mentiomed Provider(7001-4001-4801-1811) indexs are:80 & 81.
for second mentiomed Provider(7101-4101-4901-1911) indexs are:90 & 91.
II.FOR TPS the changing keys provider are:00 & 01
________________________________________________________________

5. enter the new keys(16 digits for one index line):
when u used a program to give u the latest keys(softcam.key file)
u will find that the new keys consiste of 32 digit while each index line fulled with only 16 digit &
providers given are different of what u see on your receiver(usually 00 & 01)
(IGONAR THE 128 DIGIT LINES)
SO u should do the following:
1.every 32 digit line divided to tow lines with 16 digit in each one.
2.put it in the right index as follows:
-for POLSAT DIGITAL+ TV CABO MEDIAPARKE:u will given tow lines with index 00 & 01 and each one cosiste of 32 digit :
divid index line 00 to tow 16 line and give it the indexs:80 & 81
divid index line 01to tow 16 line and give it the indexs:90 & 91
-for TPS:divid index line 00 to tow 16 line and give it the indexs:01 & 11
ENTER THE KEYS
LISTEN other indexs of TPS rarely changed & NAGRA1 indexs of POLSAT DIGITAL+ TV CABO MEDIAPARKE rarely changed.

GOOD LUCK


________________________________________________________________
For knowing POLSAT NETWORK CHANNELS on Hotbird satellite(13east)

For knowing TPS(MULTIVISION) NETWORK CHANNELS on Hotbird satellite (13east)

For knowing TV CABO NETWORK CHANNELS on Hispa satellite (30 West)

For knowing DIGITAL+ NETWORK CHANNELS on Astra satellite (19east)

For knowing DIGITAL+ NETWORK CHANNELS on Hispa satellite (30 West)

*******************************************************




*********************************************************

omax-R100 = starsat SR-X1500D SUPER MKII

*******************************************
Here is the list of similar softwares:

1.ARION AF 8100 CI = ARION 3300 = OpenBOX 8100CI

2. Sky1a = strong 4800

3.humance 2003 = besat5400

4.fortec star 5400 =mannhatan 5400

.5 nextwave 2500 without plus=sanyosat 4000

.6 nextwave 2500 plus=card G 9500 plus

.7 M1 SMART =TECHNOSAT9000

.8 TECHNOSAT1100=CITIZIN 9000 PLUS the big =HYONDAI 100

.9 ARION 300=ARIA SAT =HORZON 2000

.10 DREAM 2000 ULTRA=CITIZIN 5100 ULTRA=CITIZIN 5200 ULTRA =DANSAT VISON

11. receivers: KAON = Xtreme

12. ALL PATCHS Lazer 2003 Ci = Neotion Box 300

13. BESAT SUPER 3500 =FORTIC 3500

.14 STARSAT =STARCOM

15. Tp Sat=samsat

16. Samsat=eyesat

17. Magnum Md6000=topfield 3000ci

18. sasa 8110=sky2

19. 2MG-Guard 9500 FTA Plus = Magnum 250XL 2M

20. THE RECEIVER LG = TECHNOSAT = GOLD VISION MAGIC LUX

21. Xsat 1000 = Humax 5400

1---iris3000= iris3300= topsat5000(pal)= cochib2300a =strong 3860
2--houston8100ci =arion8100ci =obenbox8100ci
3--microx =topsat5000(nts)=astravox2500
4--hut2000 =angel1000
5--hut 2060= hut 2040 =interstar8003 =interstar8004 =manhaten2000
6--fortecstar5400 =manhaten5400

23. TP SAT=SAMSAT

24. MAGNUM MD6000=TOPFIELD 3000CI

25. Technosat 5500 SuperSmart == Technosat 6000 Plus

26. DIGIQUEST-8000-SCI . 57= KAON- KSC570

27. engel es-3003=manhattan 5900= fortecstar 6000

28.Starnet4300 = Bigsat8000 De Lux

29. powersky cisk=openbox8100ci=arion af8100ci=houston bm8100ci

30. KAON KSC-570Z= BM-8300 CI stream system

31. Stream Bm 1000 Fta = Koan 200z H/v 16.80.91

32. Stream 2000 Ci .63 = Koan 570 D H/v 12.01.a5

33. VISON GOLD 2510 2civia =SAMSUNG 202 2ci va =STRONG 4400 2ci va =ANGEL 1310 2ci via =VISON GOLD 2ci via3100pos =bigsat 2ci via


34. LUX MAGIC GOLD VISION=TECHNOSAT 6000cxci =LG 400ldr =TECHNOMAT 5000cxci

any questions?

Edit - live links deactivated.
 

DeepDiver

Regular Member
Messages
425
Likes
0
My Satellite Setup
Vista- DreamBox 7020Si Nabilo Darkstar II -7025+ Black Hole 0.11 - DM8000 BlackHole 0.11
My Location
Mariana Trench - Pacific Ocean
#2
I tested the procedure. It works well also for STARSAT SR-X650CI Super.

Well done :-Cbigsmil
 

Analoguesat

Administrator
Staff member
Messages
45,530
Likes
8,260
Location
Scottish Borders
My Satellite Setup
TM 5402HD
Skybox F3
Sky+ UK.
My Location
Scottish Borders
#3
If these are only available today, has someone thought about nabbing them and putting them up on a site somewhere else? :D
 

jack0

Regular Member
Messages
189
Likes
0
My Satellite Setup
STARCOM X550D SUPER
HW:9.6
LOADER:2.0
My Location
SYRIA
#4
sorry' so sorry
i mean only from today and only for latest version 314 date: 23-12-2004
i continiously test all last version from v233 and the receiver turned off after a period of time with error
but this version is modifide by erase line eroor with hardware version
turned upload them and enjoy
good luke
 

jack0

Regular Member
Messages
189
Likes
0
My Satellite Setup
STARCOM X550D SUPER
HW:9.6
LOADER:2.0
My Location
SYRIA
#5
here was links became incorrect so i erased
 

jack0

Regular Member
Messages
189
Likes
0
My Satellite Setup
STARCOM X550D SUPER
HW:9.6
LOADER:2.0
My Location
SYRIA
#6
the information here became dead so i erased
 

Analoguesat

Administrator
Staff member
Messages
45,530
Likes
8,260
Location
Scottish Borders
My Satellite Setup
TM 5402HD
Skybox F3
Sky+ UK.
My Location
Scottish Borders
#7
Ive removed the Sonysat software - we discourage receiver flashes on this forum, (and anything containing keys is strictly forbidden). Put a link into the thread instaed
 

jack0

Regular Member
Messages
189
Likes
0
My Satellite Setup
STARCOM X550D SUPER
HW:9.6
LOADER:2.0
My Location
SYRIA
#9
continue please i am sorry
 

Llew

cerca trova...
Staff member
Messages
14,411
Likes
3,373
My Satellite Setup
Triple Dragon, Dreambox 8000, Echostar AD3000ip, TBS6522,6925,6983 PCie cards.
Gibertini 1.25m motorised dish driven by the AD3000, with either Inverto BU Quad or Norsat / XMW Ka LNBs . SMW 1.05m + 3 other dishes. Speccy: Promax HD Ranger+
My Location
The Flatlands of East Anglia
#11
What was the question?
 

jack0

Regular Member
Messages
189
Likes
0
My Satellite Setup
STARCOM X550D SUPER
HW:9.6
LOADER:2.0
My Location
SYRIA
#12
I mean no thanks or question to reply for?
thanks for you very much
and thanks for your care
 

jack0

Regular Member
Messages
189
Likes
0
My Satellite Setup
STARCOM X550D SUPER
HW:9.6
LOADER:2.0
My Location
SYRIA
#13
Latest patches dated 24Dec for Starsat sr-x650ci SUPER & ULTRA autoupdate multivision keys. Just switch to any multivision channel and wait 2/3 minutes.
I suppose it applies also to SR -X550,3100,3200,3500,560
 

DeepDiver

Regular Member
Messages
425
Likes
0
My Satellite Setup
Vista- DreamBox 7020Si Nabilo Darkstar II -7025+ Black Hole 0.11 - DM8000 BlackHole 0.11
My Location
Mariana Trench - Pacific Ocean
#15
It comes in a more modern graphic interface, with colourful and eye catching icons. The channel moving procedure is easier. The channel scannig procedure is better, as you can choose each single satellite to scan, whereas on super version you would choose a group of satellites

You mill miss the Input Code menu, that gives direct access to the page with encryption keys. But you can still edit your keys with remote control. You press MENU, then go to INSTALLATION and press 1234.

Hope it helps
 

gasth404

Regular Member
Messages
55
Likes
0
My Satellite Setup
Starsat3500CUCIsuper
+Manhattan5900
+HumaxVA-ACI
motorised dish
My Location
Baltics
#16
last version L314 works great for Starsat sr-x3500CUCI SUPER and auto AES to.
Is this possible upgrate this with soft for 3500ULTRA ??
 

jack0

Regular Member
Messages
189
Likes
0
My Satellite Setup
STARCOM X550D SUPER
HW:9.6
LOADER:2.0
My Location
SYRIA
#18
yes this is possible upgrdte for 3500 ultra v314 only not old versions!!!!!!!
test and tell the members about your success to encourage them for the better work ultra
 

jack0

Regular Member
Messages
189
Likes
0
My Satellite Setup
STARCOM X550D SUPER
HW:9.6
LOADER:2.0
My Location
SYRIA
#19
3500cuci also auto upgrate for tps(multivision)
enjoy
 
Top