Ocko star 23.5e

Analoguesat

Analoguesat

Administrator
Staff member
My Satellite Setup
TM 5402HD
Sky+ UK.
My Location
Scottish Borders
Ocko STar (Czech republic)

Astra 3B

12363V
29500 3/4

12168V
27500 3/4


Music channel. The 12168V version has issues with the video - it jumps every few seconds...

ocko star 23.5e.webp
 
Working OK here on the Primo S2 & SX88+ no jumping or video glitches,
What receiver are you using ?
 
Technomate TM5402

Its only very slight but its there.
 
What size of dish are you using on this set up ?
 
Offset lnb on 1.1m dish aimed at 16E. Over 12dBW of signal.
 
It may be signal overload as this is a very strong transponder I am getting 95% SQ with a motorised 88cm mesh dish + SX88+
Or you may need to reset the Lnb on your fixed dish set up,
Not even slightest jumping with my set up,
12363 V 29500 is a stronger transponder 100% SQ with the same set up as above.
 
Its definitely something the way the Ocko channels are set up on 12168. Ocko is also hestitating every few seconds, TV Lux is fine. Ocko Star on 12363 is fine.

It reminds me of a less severe version of the problems the A1 channels had on YahSat 1 when one transmission parameter was set wrongly (istr short frames was mentioned by someone who had some analysis software??)
 
Back
Top