OPOS card 1.05

Messages
3
Likes
0
My Satellite Setup
Technomate 1500+super
1.1m triax dish with
old Manhattan to drive dish
My Location
scotland
#1
Hi
First post on the forum as i,m more of a reader.O-Ha Just bought the latest version of Technomate 1500+super with the software pre-loaded from October 17th 2005. My question is...if i buy an Opos card can i programme it with an Elvis programmer (i also have a CAS 2). If so, will it open some new channels for me in Nagra 1 etc. I know what i should be getting but most of 30West is still encrypted for me at present. Hope this all makes sense to you.
Cheers.
 
Messages
3
Likes
0
My Satellite Setup
Technomate 1500+super
1.1m triax dish with
old Manhattan to drive dish
My Location
scotland
#2
Oh well.....^-F
 

Topper

Amo Amas Amant Admin
Staff member
Messages
21,731
Likes
3,311
My Satellite Setup
IDD CI24 ECONO MM Penta 1.20 Galaxy II
1.2Mtr Polar MTG yes it has been on the arc for 25 years and is now fixed on 13 East using two pairs of rusty molegrips. Unlike me they never groan but always perform.
My Location
Blackburn, Lancashire
#3
:-Welcome1 to the forum tazpants

Sorry it looks like we all missed your first post so here I am replying to your first and second.
Your question is not my specialism unfortunately but as I understand it most of 30W is nag2 now but I may be wrong. Certainly with the equipment you have got you should be able to watch more than the average Joe ;)
 
Messages
3
Likes
0
My Satellite Setup
Technomate 1500+super
1.1m triax dish with
old Manhattan to drive dish
My Location
scotland
#4
Thanks for the reply. I,m still working on getting my knowledge up to speed but don,t worry, i do read the forums, so hopefully not too many daft questions from me.:-doh!
 

McDude

Regular Member
Messages
76
Likes
0
#5
Provided your receiver is patched (if there's emu for it like the other 1500's) then you should be able to clear TV cabo package (without opos) on hispasat which still uses nagra1, but for how long...nobody knows.

As for opos+elvis that should work no problem. You need multiprog 1.90 and just put it in phoenix 3.58 mode (from the MP set tab) and then use opos loader to burn files on to your card.

If you're motorised you can get few packages, with opos 1.05, all in cryptoworks, but only one at a time

Czecklink 28E and 23.5E
Turner TP 11778V 19E (5 channels)
Digiturk 7E
Kingston/arqiva 5E
UPC 15W-not sure if this still works
 
Top