Pace DS810XE

B

barrykap

Regular Member
Messages
74
My Satellite Setup
Technomate TM6800, Technomate TM6800 Super, Technomate 5200, Humax Foxsat HDR, Humax CI-8100, Lemon FTA, Force Frontier T90, Channelmaster 1.2 + Jaeger 1224, Misc other bits and bobs.
My Location
North Staffordshire
There's a new Pred out (3.59) and it brings back Pr*mier! So it was not my Cam after all.
 
rato

rato

International Administrator
Messages
1,429
My Satellite Setup
DM800; Nokia 9800s; Nokia 9902S w/T-Rex 3.66
w/ Inverto IDLP-40TL +
Technisat 33 dish; Pace DS430N + Humax HDCI-2000 w/
Gibertini OP 1.25m dish w/Inverto 0.3dB. & Invacom 0.2dB. w/ Spaun SAR 411;
CAS 3;FUN7; SkyStar2; AltDVB;
My Location
Setubal, Portugal
Yes, working great(3.59) here on my Humax & no more issues with the Sky card.:)
 
M

markinstien

Member
Messages
2
My Satellite Setup
motorized Pace HD
My Location
Manchester
barrykap said:
I have just taken delivery of a brand new Pace DS810XE I think Pace are onto a winner. ...............I ahve yet t try it with my motorised dish and also to try it with a Dragon Cam. I will report on that when I have done so.
Did you have any success using the Dragon cam I am considering which cam if any to buy,no info as to if any work with this reciever?
 
P

Pansy

Member
Messages
1
My Satellite Setup
deltasat 1104
mrev
acer laptop
My Location
italy
I don't know which one to buy, but i can tell you that until now, i couldn't have my xcam platinum working with the pace hd receiver. Does anyone have the same problem or know about some fix?

thanks
 
dirtytuga

dirtytuga

Regular Member
Messages
363
My Satellite Setup
FTE MAX. S200+DB500S +Hispasat (60cm)+Astra1+hotbird13 (1m)
My Location
PT
barrykap said:
There's a new Pred out (3.59) and it brings back Pr*mier! So it was not my Cam after all.
So, Barrycap, have you now your cam working fine with the pace?
Please confirm that. I want to buy one but it must work with a cam to open D+ Prm... and others.
Thanks
 
L

littledevil

Member
Messages
10
My Satellite Setup
Humax 5400 dragon cam,matrix reloaded.
My Location
Scotland
hi guys I have also bought the receiver :) working great but same issues with the dragon cam using predator 3.62 , also have a matrix reloaded cam which the receiver sees but when I put my titanium card in it opens nothing
 
A

andypest

Member
Messages
4
My Satellite Setup
Sky Digital - Living Room
DS810XE - Bedroom
My Location
Heathrow
Just to let you all know the new update is out on 2D will check after It finishes updating itself if dragon works.

Here is the email received from pace.

Hello,

A software update (v1.0.35) for the Pace DS810XE High-Definition set-top box is available on the following satellites:

HotBird @ 13.0°E: 12476 H 27500 / PID 1999
Astra 1 @ 19.2°E: 12148 H 27500 / PID 2402
EuroBird 1 @ 28.5°E / Astra 2 @ 28.2°E: 11428 H 27500 / PID 2402
To download the new software please enter the 'Setup menu' and select 'Software update'.

Next select the appropriate satellite and ensure that the transponder parameters match those given above.

Then press <OK> to start the update.

The download will take several minutes, during which time the box should not be turned off.

After the download is complete we recommend resetting the box using the 'Factory Reset' selection in the 'Setup Menu'.

This will erase all the stored user settings. Please note that this step can be omitted, for example if you want to keep your own channel lists.

The main areas of improvement compared with previous software version are as follows:

Correction of 4:3 video display when viewing SD channels on HDMI output in some instances
Greek language added
Improved stability of the application
Improved channel scanning of some satellites
Improved handling of certain CAM modules
Warm regards,

Pace Micro Technology plc

Bringing Technology Home

Victoria Road, Saltaire, West Yorkshire BD18 3LF www.pacemicro.com

This E-mail and any attachments hereto are strictly confidential and intended solely for the addressee. If you are not the intended addressee please notify the sender by return and delete the message. You must not disclose, forward or copy this E-mail or attachments to any third party without the prior consent of the sender. Pace Micro Technology plc (registered in England and Wales no. 1672847) whose head office is based at Victoria Road, Saltaire, West Yorkshire BD18 3LF, UK. Tel +44 (0) 1274 532000 Fax +44 (0) 1274 532010 and at http://www.pacemicro.com.




This message has been scanned for viruses by BlackSpider MailControl


All the best
Andy,
 
remlap

remlap

Specialist Contributor
Messages
2,295
My Satellite Setup
Gibertini 104cm motorised dish with a Technomate 5402 HD CI+ and TBS 6925 + Gibertini 90cm with 9E 13E 19.2E and 28.2/5E with a Hauppauge WinTV NOVA-HD-S2 Media Centre PC and Pure EVOKE Flow Radio + 100cm Channel Master with 2 LNBs at 24.5W and 30W
My Location
Wales
What is the cheapest these are going for these days?
 
A

andypest

Member
Messages
4
My Satellite Setup
Sky Digital - Living Room
DS810XE - Bedroom
My Location
Heathrow
well i managed to get mine off ebay about 3 months ago and i paid £55 for it and it was brand new. But quick search on google and it looks like £99 is the best price at the moment.
 
L

littledevil

Member
Messages
10
My Satellite Setup
Humax 5400 dragon cam,matrix reloaded.
My Location
Scotland
well I have done an update lastnight it still says version 130 but the dragon cam works in it at least, it lets me into the menu now I can see premiere hd film no problem but when I go into priemiere discovery I see the picture but a band comes over the screen and it says invalid module ???? just on discovery :( and on 19.2 east astra
 
L

littledevil

Member
Messages
10
My Satellite Setup
Humax 5400 dragon cam,matrix reloaded.
My Location
Scotland
and using predator 3.63:-snowman
 
J

jasonx2007

Member
Messages
19
My Satellite Setup
pace ds810xe /manhatten st-200 /tecnomate 1500+ super /65cm traix dish on a satcatcher motor /1 x trex twin cam 1x dragon twin cam duolabs cas3 programmer and diablo cam light
My Location
hull city/uk
using trex cam on new firmware on pace 1.0.35
firmware on trex cam is predverde working ok and drogon cam firmware 3.62

the pace hd box is good the setup is crap when u figure it out its easy

box is used on a sat catcher disquc/usasl motor and its a bit off a pain in the bum it finds 13east 28e but the rest u have to find ur self using the menu for diy in repect the box is great for pulling in weak channels on some sats even if ur dish as dropped a bit in the wind like mine lol

so i am happy with it and the free hd lead that comes with it

the link for the manufacture shop £99
https://www.paceshop.com/shop/product/details/ds810xe-hd-set-top-box:-thumbup
 
J

jasonx2007

Member
Messages
19
My Satellite Setup
pace ds810xe /manhatten st-200 /tecnomate 1500+ super /65cm traix dish on a satcatcher motor /1 x trex twin cam 1x dragon twin cam duolabs cas3 programmer and diablo cam light
My Location
hull city/uk
forgot to say people u cant update ur dragon or trex cam by keys .or like me a loader card so best have a cas 3 programmer or a spare box on it .like me to update keys and files
 
L

littledevil

Member
Messages
10
My Satellite Setup
Humax 5400 dragon cam,matrix reloaded.
My Location
Scotland
is priemiere discovery working well with t-rex ??
 
J

jasonx2007

Member
Messages
19
My Satellite Setup
pace ds810xe /manhatten st-200 /tecnomate 1500+ super /65cm traix dish on a satcatcher motor /1 x trex twin cam 1x dragon twin cam duolabs cas3 programmer and diablo cam light
My Location
hull city/uk
discorvery hd is working good on trex v4.1 and dragon twin 4.1

with firmware 362 its fast on firmware 363 wait a few seconds to open
 
L

littledevil

Member
Messages
10
My Satellite Setup
Humax 5400 dragon cam,matrix reloaded.
My Location
Scotland
but there is no sound on discovery
 
J

jasonx2007

Member
Messages
19
My Satellite Setup
pace ds810xe /manhatten st-200 /tecnomate 1500+ super /65cm traix dish on a satcatcher motor /1 x trex twin cam 1x dragon twin cam duolabs cas3 programmer and diablo cam light
My Location
hull city/uk
just got a diablo cam light to try out on the pace and i
must say its rubbish it crashes on firmware 232

if you going for a cam get a trex or dragon at lease you dont need to
wipe the box everytime you flash the cam

hope a firmware from pace helps this
 
B

billbo

Member
Messages
31
My Location
Dublin
anyone konw how to set one off these boxs up with a moter ???? cant get it to work at all

cheers
 
J

jasonx2007

Member
Messages
19
My Satellite Setup
pace ds810xe /manhatten st-200 /tecnomate 1500+ super /65cm traix dish on a satcatcher motor /1 x trex twin cam 1x dragon twin cam duolabs cas3 programmer and diablo cam light
My Location
hull city/uk
right its a bit hard to do but easy after a while .
depending on what motor u got . d1.2 or usal motor
first off find 1 west as a ref point or 13east . once you done that do a factory reset and scan ur ref point sat as a single lnb .once done that and ur channels are done
go to menu and select new channels move it to disqe1.2 you then get all the sats in the list . select each one you want when tuned go back to new channels in menu and hope it dont crash the box

. on some motors you have to manual find the sat by selecting find sat go manual dont let it do it on its own . as on my its when to far east and snap my wire

hope that helps for the time been . the most i got i is 4 sats astra 19 astra 28 and 1 west . before the it fills up .

great hd box but the software is very buggy

one last thing if you had the motor on a another box and the sat postion are stored in the motor it should work straight away
 
B

billbo

Member
Messages
31
My Location
Dublin
cheers m8 will give it ago yes m8 it is a great hd box for the price at £ 70 you cant go wrong
 
Top