PIC16F84 + 24LC16B PCB Card

uksathees

Regular Member
Messages
25
Likes
0
#1
hi i just porgrammed the PIC16F84 + 24LC16B PCB Card with the renber keys for tps and ART.

but it wont unlock the channels on ART, anyone know y, the channels i am after are the asian channels which are DAN, jeya, raj, ceyleno and trt chans.

also there seems to be two different ART ID?? i do not understand what this means. one Arabesque (ART) ID: 02 11 00 and another OLD Arabesque (ART) ID: 01 64 00. the via2 key is for the 016400, the asian channels are on both IDs with same frequency, how do distiquesh between these ids to get the channels to work.

please help

thanks
 

PWH

Regular Member
Messages
38
Likes
0
My Satellite Setup
Loads of stuff
#2
I take it that you can get TPS? In which case the card is working.

It will not decrypt all ART programmes.

you could disassemble the HEX file and change the key in the eeprom area and the PPID in the program area to 02 11 00 then you will have an ART card.
There is a challenge for you

By coincidence (I think) the 01 start is Viacess 1 Old card, and 02 is Viacess 2 new card
 

uksathees

Regular Member
Messages
25
Likes
0
#3
PWH said:
I take it that you can get TPS? In which case the card is working.

It will not decrypt all ART programmes.

you could disassemble the HEX file and change the key in the eeprom area and the PPID in the program area to 02 11 00 then you will have an ART card.
There is a challenge for you

By coincidence (I think) the 01 start is Viacess 1 Old card, and 02 is Viacess 2 new card
ahh yea hehee challange, but the 02 11 00 keys for via 2 has not been found, the via 2 key is for other id, do u think changing the id will do the trick.

Viaccess 2 key 08 for 016400 ( DAN Channels on HotBird - 12692 H 27500 3/4)
and thode DAN channels are the one i want on ART.
 
Top