Plese help smargo smartreader+ and Norwigian canal digital card 1w

T

tommy88

Member
My Satellite Setup
dm800se
My Location
norway
Hello im new to linux and cardsharing. I have a norwigian canal digital card 1West that i cannot get working with my smargo smartreader+.

Anybody have a littel guide or something ? Is it any special mhz i have to use in config ?
When i set the card in the reader the green light disappears on the smartreader+.

Do that mean something can it not be read?.
When i log into newcs web interface erything has a red cross accept Blocker.

Status CAID Mhz Resets ECMs Net ECM Node Reader
0000 368 0 0 0 /dev/usb/tts/0 0 (smartreader+)

Setup:
ClearOS 5.2
1xsmartreader+ usb with firmware 1.3
CCcam-2.1.2 and Newcs-1.67_RC1 (Do i need both?)




[ 11:29:38 ] [ Loader ] Reader type 2 on node /dev/usb/tts/0
[ 11:29:38 ] [ CardMan ] Reseting reader parameters
[ 11:29:38 ] [ Phoenix ] Opening device /dev/usb/tts/0
[ 11:29:38 ] [ Phoenix ] Could not get device /dev/usb/tts/0
[ 11:29:38 ] [ Loader ] Reset failed ...
[ 11:29:38 ] [ Card queue /dev/usb/tts/0 ] Starting...
[ 11:29:38 ] [ Loader ] Starting Newcamd Server on port 15050
[ 11:29:38 ] [ Loader ] Starting Radegast Server on port 10001
[ 11:29:38 ] [ SockSrv ] Server thread started
[ 11:29:38 ] [ NewCS ] Ready to GO! :)

Please help me have tried and tried for 4 days now :(
 
Don't use newcs, cccam is all you need. There are ready made cccam config files for the Scaninavian cards on digsat.net.
 
Back
Top