plzzzzzzzzzzzzz help(humax 5400z)

[toookyo]

plz i mant to ask for the values of the diod ziner (z03) in the power supply of my humax 5400z
and for the R21 where there is C19 and C20
they r burnt and i want to change them so plzzzzzzzzzzzzz helpO-no

 

[satelliteman]

Post moved to the appropriate section

 

[Topper]

Unless someone is still running such an old stb and is generous enough to open it and have a look for you I doubt you will get the information in a quick timescale. You may find the information you seek on a dedicated humax site such as the one below if you cannot wait.
-http://www.humax-zone.net/index.php?page=Otherm_tools

 

[toookyo]

thanx , but the site is blocked

 

[Analoguesat]

Its working fine - make sure you remove the leading (-)

 

[toookyo]

i did
but i live in an arabic country so it might be blocked by the government
but i will try again

 

[futumsch]

My F1 VACi seems to have a different PSU board (gave me a opportunity to hoover out dead insects anyway) but the info from Toppers link for the P5-9905 PSU board is :

C09 1000uF 16v
C10 1000uF 16v
C13 1000uF 25v
C14 1000uF 25v
C15 470uF 25v
C16 470uF 25v
C17 220uF 50v
C18 220uF 50v
C19 100uF 50v
C20 100uF 50v
C21 1uF 50v

R21 100 Ohm 0.25w
ZD3 30v Zener Diode 1.3w,

The cathode on the zener is facing away from the regulator heatsink.. i.e to the outside of the board.

 

[toookyo]

thanx very much