Port 16001
- Thread starter fintannl
- Start date
- My Satellite Setup
- Triple Dragon, Dreambox 8000, Echostar AD3000ip, TBS6522,6925,6983 PCie cards.
Gibertini 1.25m motorised dish driven by the AD3000, with either Inverto BU Quad or Norsat / XMW Ka LNBs . SMW 1.05m + 3 other dishes. Speccy: Promax HD Ranger+
- My Location
- The Flatlands of East Anglia
I had the same problem when I first used Cccaminfo. I just removed the # from WEBINFO LISTEN PORT : 16001 in Cccam.cfg, although ISTR the defaults for Cccam.cfg should allow 16001 to open anyway.
still no joy. when i go into blue panel and check softcam setup i see that it says 'cardserver=none'. why would this be? i wonder if this is the problem. is it necessary to have the card in the reader at all to check the setup
B16MCC
Dreambox Gimp & Coder
- My Satellite Setup
- 2 Dreamboxes..........
---------------------------------------------
--- DM 8000 HD PVR & DM 800 HD ---
Motek SG2100 & Triax 80cm Dual LNB
------ Fixed Dish 28e Quad LNB -------
---- Sly HD Full & 24" Apple iMAC ----
- My Location
- /var/tuxbox/config
What image are you running ?
Normally in the blue panel you would expect to see CCcam as the active Cam Emu.
If it's not running then you will get no response on port 16001.
Normally in the blue panel you would expect to see CCcam as the active Cam Emu.
If it's not running then you will get no response on port 16001.
Burnham Beech
Specialist Contributor
You don't need a card in the slot.
What does it say when you put http://192.168.1.nn:16001 in you browser. Do you get the password screen?
192.168.1.nn > put in your DM IP address.
What does it say when you put http://192.168.1.nn:16001 in you browser. Do you get the password screen?
192.168.1.nn > put in your DM IP address.
Error message is
The webpage cannot be displayed
Most likely cause:
•Some content or files on this webpage require a program that you don't have installed.
What you can try:
Search online for a program you can use to view this web content.
Retype the address.
Go back to the previous page.
A program I don't have installed? I running Open Pli on DM500
The webpage cannot be displayed
Most likely cause:
•Some content or files on this webpage require a program that you don't have installed.
What you can try:
Search online for a program you can use to view this web content.
Retype the address.
Go back to the previous page.
A program I don't have installed? I running Open Pli on DM500
as an update the cccam.cfg looks LIKE this
#This config was created using the Dreambox Config Creator.
#Designed & Written by B16MCC
SERVER LISTEN PORT : 12000
SMARTCARD CLOCK FREQUENCY : /dev/sci0 3430000
BOXKEY : /dev/sci0 AA AA AA AA
F: 12000 user pass
F: 12000 user pass
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
CCCAM 2.1.4 is my only and default and active EMU
#This config was created using the Dreambox Config Creator.
#Designed & Written by B16MCC
SERVER LISTEN PORT : 12000
SMARTCARD CLOCK FREQUENCY : /dev/sci0 3430000
BOXKEY : /dev/sci0 AA AA AA AA
F: 12000 user pass
F: 12000 user pass
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
CCCAM 2.1.4 is my only and default and active EMU
Ignore post. I had originall put in webinfo port and this didn't work. So then i included telnetinfo port. It still didn't work but once I restarted the box I now have information on 16000 and 16001. Thanks for the help. I don't like changing the nature of the thread but I wonder can someone confirm when I set up a cs if I need to port forward on my router port 12000 to mydreamboxip or does the remote box somehow manage to locate the box by means of specifying port 12000 in the Cline
B16MCC
Dreambox Gimp & Coder
- My Satellite Setup
- 2 Dreamboxes..........
---------------------------------------------
--- DM 8000 HD PVR & DM 800 HD ---
Motek SG2100 & Triax 80cm Dual LNB
------ Fixed Dish 28e Quad LNB -------
---- Sly HD Full & 24" Apple iMAC ----
- My Location
- /var/tuxbox/config
fintanni, if you're hosting on 12000 then you'll need to forward the port, otherwise no one will connect to it from outside your lan.