Sold Prime Focus 1.8m Channel Master

Status
Not open for further replies.
Captain Jack

Captain Jack

Retired human
My Satellite Setup
See signature
My Location
North Somerset
This dish was @scopus's that I got from him for free.

Unfortunately, I never got around to installing it or even trying it and it's been sat in my garage for 7-8 years now, gathering dust. So it's free to a good home that will, hopefully, make use of it.

The dish is a 4-piece petalised version - there is no mount, though I think Chris still has(?) the square brackets needed for mounting. It does have LNB arms and holder. And the LNB itself somewhere....

I don't have my own pictures but it's the same as this - For Sale - 1.8 Prime focus Channel Master

It will fit in any reasonable sized car with the four petals disassembled.

Collection from North Somerset.
 
@Captian Jack Thank you for the dish, happy to post reports.
Can anyone help me with the original Channel Master info / pictures showing how it was fixed to the original polar mount and general info on Gain F/D etc?
 
Joolz said:
@Captian Jack Thank you for the dish, happy to post reports.
Can anyone help me with the original Channel Master info / pictures showing how it was fixed to the original polar mount and general info on Gain F/D etc?
Click to expand...
Somewhere on this site is a link to the manual (I think it covers both 1.8 and 2.4m versions) The bolting points on both models is the same
 
This is the closest I have, says it's 8' or 2.03m(?) but the design and construction are appear to be the same. I tried to upload it but the file was too big.

Code: 
https://www.manualslib.com/manual/1013266/Channel-Master-6392.html#product-6346

A photo of the polar mount on the 3m version:

Channel MASTER 6346 3m SMC dish

Hi ! Just an information after a lot of time I found the original polarmount of 6346 dish. At the moment I use Proform h-180 motor , but it's' not enough for the antenna in KU, so I am going to install original POlarmount: the question is: I see there are only three declination set-up, for use...
www.satellites.co.uk www.satellites.co.uk
 
ozumo said:
This is the closest I have, says it's 8' or 2.03m(?) but the design and construction are appear to be the same. I tried to upload it but the file was too big.

Code: 
https://www.manualslib.com/manual/1013266/Channel-Master-6392.html#product-6346
Click to expand...

ozumo said:
This is the closest I have, says it's 8' or 2.03m(?) but the design and construction are appear to be the same. I tried to upload it but the file was too big.

Code: 
https://www.manualslib.com/manual/1013266/Channel-Master-6392.html#product-6346

A photo of the mount on the 3m version:

Channel MASTER 6346 3m SMC dish

Hi ! Just an information after a lot of time I found the original polarmount of 6346 dish. At the moment I use Proform h-180 motor , but it's' not enough for the antenna in KU, so I am going to install original POlarmount: the question is: I see there are only three declination set-up, for use...
www.satellites.co.uk www.satellites.co.uk
Click to expand...
Thanks, all these help alot. @ozumo I see from your profile you seem to like Channel Master dishes :Y
 
dcp_0027-jpg.42287

www.satelliteguys.us

6ft Channel Master dish questions

I went to take a look at a dish today that a guy is wanting to get rid of. Here's the details and I am hoping to hear what you guys think of it. Channel Master Fiberglass 4 sections Didn't get a pic, but the dish other than being dirty looks in good shape. Things I figure I would have to...
www.satelliteguys.us www.satelliteguys.us
 
i didnt know they did a PF version of the 1.8m
have fun @Joolz
 
Status
Not open for further replies.
Back
Top