problem setting up gen viasat hd card in dm 800se

M

moosegoose

bog standard
Messages
296
My Satellite Setup
80 cm dish hh motor teco tm1000 dreambox 7020
cas 3interface
dragon cam.promax tv explorer 2.
My Location
norwich
hi im trying to set up a dreambox 800se to work with a gen viasat hd card.
im using cccam 2.2.1 and so far i have the boxkey which i calculated using one on the boxkey generators. my serial number is 11 digits long, so tried the calculation with the starting 0 and without the 0 and both way gave the same box key. what i have tried so far is to use dcc to ftp . going to var ect cccam config then edit and then entering this. boxkey: / dev/sci0 ** ** ** ** to the first line and that's it. i then re-start cam and go to cccam smart card info and it states
welcome to cccam information client
card reader /dev/sci0
no or unknown card inserted
and dito for slot 2
i am in no shape or form trying to set up a card share. it is solely to find a workaround to stop entitlements being withdrawn from my prepaid card.
so with this in mind if any one have any info to stop entitlements it would be appreciated.
please note i am the mother of all noobs when it comes to dreamboxes so be gentle regards moose.
 
blackers

blackers

Member
Messages
102
My Satellite Setup
Gibertini 1.25, stab hh120,, vu+solo, tm5402hd, amiko micro hd, sky + hd full sub inc setanta..
My Location
Essex Uk
I would think about using a oscam to read the card as it is easier to stop emms coming through in my opinion. Was looking at testing this myself but don't have access to a card.
 
P

paxrax

Regular Member
Messages
191
My Satellite Setup
☆☆☆vu+ duo☆☆☆
dm800s (rev m)☆☆☆
dm800s (rev l3)☆☆☆
1m motorised dish☆☆☆
zone 1 sky dish☆☆☆
My Location
uk
cccam cannot read the newer viasat card , needs to be oscam.
 
M

moosegoose

bog standard
Messages
296
My Satellite Setup
80 cm dish hh motor teco tm1000 dreambox 7020
cas 3interface
dragon cam.promax tv explorer 2.
My Location
norwich
paxrax said:
cccam cannot read the newer viasat card , needs to be oscam.
ok thank you i will try oscam then will be some time though as im a bit of a noob
 
M

moosegoose

bog standard
Messages
296
My Satellite Setup
80 cm dish hh motor teco tm1000 dreambox 7020
cas 3interface
dragon cam.promax tv explorer 2.
My Location
norwich
ok i have downloaded oscam using the remote control. there were a choice of about 5 so i picked the one that said stable card server. why some one would want unstable cams i don't know. any way im having a prob finding it. will it have a config folder where i wan enter the stuff. oh i have restarted the cam on the box and it is now running oscam.
 
N

newtolinux

Member
Messages
12
My Satellite Setup
t90 wave frontier
My Location
newcastle
you now need to configure three key files : - oscam.server , oscam.conf , oscam.user . Keep global and unknown emm's blocked to this card and only allow shared or unique. Only the sd channels from this card will work as the hd channels require a secondry EK key and HW key. Good luck and plenty of onformation around the net. Google is your friend . Just google for 093e oscam config.

new2
 
M

moosegoose

bog standard
Messages
296
My Satellite Setup
80 cm dish hh motor teco tm1000 dreambox 7020
cas 3interface
dragon cam.promax tv explorer 2.
My Location
norwich
i have only just found where oscam server and stuff were. they were under var ect tuxbox. now the fun begins im still open to help guys. and once again all im after is running new type viasat card in dm 800 se. not going to share or anything. regards moose.
 
M

moosegoose

bog standard
Messages
296
My Satellite Setup
80 cm dish hh motor teco tm1000 dreambox 7020
cas 3interface
dragon cam.promax tv explorer 2.
My Location
norwich
moosegoose said:
i have only just found where oscam server and stuff were. they were under var ect tuxbox. now the fun begins im still open to help guys. and once again all im after is running new type viasat card in dm 800 se. not going to share or anything. regards moose.
i have now found this setup on google. apart from the boxkey is there anything i need to edit before i paste in relevent sections.
Viasat 93E NDS ( internal cardreader )
[HR][/HR] oscam.conf

[global]
nice = -1
waitforcards = 1
clienttimeout = 5
cachedelay = 120
logfile = std
saveinithistory = 1

[newcamd]
key = 0102030405060708091011121314
port = 34000@093E:000000
keepalive = 1

[webif]
httpport = 16002
httpuser = root
httppwd = pass
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

oscam.server

[reader]
label = Viasat
protocol = internal
detect = cd
device = /dev/sci0
EMMCache = 1,3,2
group = 1
caid = 093E
ident = 093E:000000
boxid = xxxxxxxxx
mhz = 500
cardmhz = 500

oscam.user

[account]
user = user
pwd = password
group = 1
au = Viasat

CCcam.cfg

N: 127.0.0.1 34000 user password 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
 
A

A nonymous

Member
Messages
3,586
It all depends if your card is definately an 093e card. It could be an 090F card.

Each card has different settings. Im not even sure if you need the boxkey. You don't need the boxkey with the UK package which also uses NDS.
 
M

moosegoose

bog standard
Messages
296
My Satellite Setup
80 cm dish hh motor teco tm1000 dreambox 7020
cas 3interface
dragon cam.promax tv explorer 2.
My Location
norwich
nanochickin said:
It all depends if your card is definately an 093e card. It could be an 090F card.

Each card has different settings. Im not even sure if you need the boxkey. You don't need the boxkey with the UK package which also uses NDS.
hi and thanks how would i know the card type 093e or 090f.
 
solly

solly

Specialist Contributor
Messages
4,832
My Location
Tel Aviv, Israel
any know new viasat 0940 ?
 
Top