Johnnics
Member
- Joined
- Apr 5, 2020
- Messages
- 23
- Reaction score
- 5
- Points
- 3
- Age
- 63
- My Satellite Setup
-
Techonmate TM-5402 M3, Technomate TM-2600M3 Diseqc HH Motor,
Quad LNB, SKY Dish 750mm
- My Location
- Londonderry
Hi Guys need some help, advice on NEW MOTORISED SATELLITE SETUP
Have a Technomate 5402 M3 Satellite receiver and a Technomate TM2600 M3 Diceqc HH Motor. Quad LNB, 2 cables 1 to motor then to LNB and another straight to LNB
Have everything setup but the first thing I notice was when I tried manual button it did not move east or west checked software and deleted limits but still no movement. There is on motor power green led and a flashing orange signal to say received command then a solid orange light .Limits set atfactory 70Deg West and 70Deg East didn't check them as it means taking dish off hope its something else
second thing is two red bars I presume signal strength only left hand side solid at 96% and right hand flashing 0 - 97% 97% is only a quick flash I think its looking for signal????
First of all no motor movement and Im I right on the red bars signal strength Can anyone help.
Thank you John
Have a Technomate 5402 M3 Satellite receiver and a Technomate TM2600 M3 Diceqc HH Motor. Quad LNB, 2 cables 1 to motor then to LNB and another straight to LNB
Have everything setup but the first thing I notice was when I tried manual button it did not move east or west checked software and deleted limits but still no movement. There is on motor power green led and a flashing orange signal to say received command then a solid orange light .Limits set atfactory 70Deg West and 70Deg East didn't check them as it means taking dish off hope its something else
second thing is two red bars I presume signal strength only left hand side solid at 96% and right hand flashing 0 - 97% 97% is only a quick flash I think its looking for signal????
First of all no motor movement and Im I right on the red bars signal strength Can anyone help.
Thank you John