gsmserv
Regular Member
- Joined
- Jun 30, 2005
- Messages
- 20
- Reaction score
- 0
- Points
- 0
- Age
- 45
- My Satellite Setup
- DreamBox7000s120HDD,MMv1.05,Fun6,CAS2(add-on)90cm satellite dish,2LNBsDISQ,BSkyB dish,HP Pavilion dv1000 Intel Pentium M processor 1.60GHz 512 MBRAM 60GbHD DVD RW,1 Mb broadb,LAN,PanasonicSA-HT520 home cinema system,28"JVCflat,wide.
- My Location
- ENGLAND
hello,
situation is:
ive bought Magic Module about 9 months ago
On the back of module is written
P/N : 8106/2003
v 1.05
i remember long time ago i have put this module into my dreambox 7000s.
Common interface menu said Penta 1.1
but i didnt use it till now anymore.
when i try to put know CI says DREAMLOAD. WHY??????
ive got CAS2 as well. So, ive tryed to flash it.
connected CAS2 to my laptop, run cas studio 6.1,
pressed "connect"
ive got :
CAM connected
Xilink XC9536XL CPLD Version 3 detected
Functionality not warranted
Flash unknown : Manufacturer ID : 0x0090 ID : 0x0000
Detecting CAM
Pressed Erase All
and i have "Erasing Error on Block 0,1,2,3...............34.
Erase compleated.
i extracted my Penta 1.11 rar file
ive got penta1.11.mbf (or something....), changed to .bin(just changed 3 last letters)
After that i started to write Penta 1.11
After mesagge "flashing compleated" just pressed EXIT.(once i tryed write Xilink, but the same problem anyway)
i put Magic Module into the Dreambox....and have DREAMLOAD.
ive tryed 3 or 4 times....same problem.
any idea???
thank you very much
situation is:
ive bought Magic Module about 9 months ago
On the back of module is written
P/N : 8106/2003
v 1.05
i remember long time ago i have put this module into my dreambox 7000s.
Common interface menu said Penta 1.1
but i didnt use it till now anymore.
when i try to put know CI says DREAMLOAD. WHY??????
ive got CAS2 as well. So, ive tryed to flash it.
connected CAS2 to my laptop, run cas studio 6.1,
pressed "connect"
ive got :
CAM connected
Xilink XC9536XL CPLD Version 3 detected
Functionality not warranted
Flash unknown : Manufacturer ID : 0x0090 ID : 0x0000
Detecting CAM
Pressed Erase All
and i have "Erasing Error on Block 0,1,2,3...............34.
Erase compleated.
i extracted my Penta 1.11 rar file
ive got penta1.11.mbf (or something....), changed to .bin(just changed 3 last letters)
After that i started to write Penta 1.11
After mesagge "flashing compleated" just pressed EXIT.(once i tryed write Xilink, but the same problem anyway)
i put Magic Module into the Dreambox....and have DREAMLOAD.
ive tryed 3 or 4 times....same problem.
any idea???
thank you very much