Problems with CBC Sport on Octagon SX88+

[mikeisyou]

I'm having problems viewing CBC Sport 11135 H 27500 on 46e Azersat. This evening I tried to view the channel but it was just a blank screen so I decided to rescan and after the rescan the channel vanished. I'm having no problems viewing the other channels on that frequency/transponder.

I spoke to someone else and they say the channel is working fine via another receiver.

I'm using my Octagon SX88+ software version 1.05.62

Could someone else with an Octagon receiver please look to see if they have this problem

 

[Mickha]

CBC Sport is no longer FTA, it's encrypted, using BISS.

 

[mikeisyou]

CBC Sport is no longer FTA, it's encrypted, using BISS.

It may be biss encrypted but it is no longer showing up on my receivers list of channels. I have tried multiple scans

 

[Mickha]

Just checked, and it's still there, showing as CBC_Sport_HDtv
Try changing your frequency slightly and scanning in 11132 H 27500 DVB-S, or 11138 H 27500

 

[mikeisyou]

Changing the frequency did not work unfortunately

 

[stephan94]

Hallo
No problem with CBC sport.
found with the blindscan

You have not, by mistake, requested a search only with FTA?

.

 

[william-1]

You may be overloading your satellite tuner:-

Help Required - What's wrong with Hotbird 13e

7 Days ago most of tps no signal ? Is there any change or satellites replacement @ 13e ??

www.satellites.co.uk

 

[mikeisyou]

You may be overloading your satellite tuner:-

Help Required - What's wrong with Hotbird 13e

7 Days ago most of tps no signal ? Is there any change or satellites replacement @ 13e ??

www.satellites.co.uk

Sure but I can scan it no problem, signal is fine. It's just CBC Sport that's missing. I haven't reached the channel limit on my box either.

 

[mikeisyou]

Hallo
No problem with CBC sport.
found with the blindscan

You have not, by mistake, requested a search only with FTA?

.

FTA search is off, I have tried both blind scan and tp scan. I will do a factory reset in the morning

 

[Analoguesat]

Its not something as simple as the channel sid is missing from the transmission is it? Ive seen that on some receivers in the past & you cant scan them in automatically - you have to put the pids in manually.

 

[ozumo]

Have you tried rolling back to an earlier firmware version?

 

[mikeisyou]

Its not something as simple as the channel sid is missing from the transmission is it? Ive seen that on some receivers in the past & you cant scan them in automatically - you have to put the pids in manually.

That's what I thought it initially.


I have solved the problem by deleting all the biss keys in the system.