Problems with HD DVB-S2 and OSD in DVBViewer

[Przemek211]

Hi, i have few problems with dvbviewer. I don't get any replies on official board
I'm using the newest version of DVBV downloaded from members section + ArcSoft codecs (and Powerdvd 9 codecs for test) and EVR. This works with Skystar S2 on the newest BDA driver. Running on Vista Home premium with all new updates. My PC conf is: P4 2,6GHz, 1GB RAM, HD2600XT on AGP.
My biggest problem: On FTA HD DVB-S(2) channels from Astra, all is good. But on hotbird only HD DVB-S FTA is ok. HD DVB-S2 is no video and audio, but signal is still ok. (beetwen 78-80% and on astra is similar) Sometimes, for approximatelly 500ms i hear sound. I'm using also local sharing in my home (it's legal in my country) and DW on HD DVB-S2 channels also go ok, but picture is black
Second, but smaller problem:
Sometimes OSD isn't started. If i change channel i don't see nether panel. If i click Esc also don't start menu and not working volume changer in scroll. I must restart app.
Third problem:
I have a two satellites config (astra + hotbird). If i open program on hotbird and next go to astra channels, DVBV view a 15% of quality signal and not view a channel. If i close program on astra, on next open all is ok. (go from astra to hb is ok, but if again go to astra i have the same problem).

 

[kwp58]

It is a processor problem or codec problem, in dvbviewer.
Look processor loading.Ctrl+Alt+Del.
In HD2600XT hardware acceleration works.

 

[Przemek211]

yes, if i'm using dxva (arcsoft or powerdvd codec) channels from astra assume approximately 30% from my CPU. Without this function (coreavc - 100% and picture jumping).
On HD channels from HB which not working processor consuming about 5-20%.
Thanks for your reply and if you have any other idea please write here

 

[kwp58]

yes, if i'm using dxva (arcsoft or powerdvd codec) channels from astra assume approximately 30% from my CPU. Without this function (coreavc - 100% and picture jumping).
On HD channels from HB which not working processor consuming about 5-20%.
Thanks for your reply and if you have any other idea please write here

P4 2,6GHz - the weak processor. Wash Intel Core2 Quad CPU Q8600 @2.4 Ghz works with HDTV on 30-35 % [on dvbdream,13E - 12130H 27.5 - M2HD]

I can send by mail dvbdreamsetup v14i+codecsfordvbmagic [10 Mb].The best program.
_http://www.filestube.com/67b86a9be96c07ec03ea/go.html

 

[Przemek211]

Ok, but i buyed graphic card specially with DxVA for HD films and HD television. When i'm using with this function - on M2 HD I have also 30-35%, sometimes less.