Trust
Specialist Contributor
- Joined
- Jul 18, 2004
- Messages
- 1,137
- Reaction score
- 1,621
- Points
- 113
- Age
- 78
- My Satellite Setup
- 1.8 m CM at SMR 1224 + Elev. with 7 lnb changer Ku (lin - circ) - Ka (lin - circ) C (lin - circ)
- My Location
- Nijmegen Netherlands
A idea from long time ago but never found the time to make a start .
Two identical disecq rotors at one shaft , solid enough for heavy 1.2m ChannelMasters and 1.5m Gibertini / Laminas dishes .
Its the first prototype , both rotors must be modified (electronics ) also planned arc enlargment .
On the pictures just a mechanicle setup , long side plates must be more sturdy .
For the lower motor a special raincover is needed .
also made and put a angle iron between the upper U-clamp to keep the pole clamp on top .
Two identical disecq rotors at one shaft , solid enough for heavy 1.2m ChannelMasters and 1.5m Gibertini / Laminas dishes .
Its the first prototype , both rotors must be modified (electronics ) also planned arc enlargment .
On the pictures just a mechanicle setup , long side plates must be more sturdy .
For the lower motor a special raincover is needed .
also made and put a angle iron between the upper U-clamp to keep the pole clamp on top .