Rascom 2.8E - Congo-Kinshasa mux - changes made

Vipersan

Vipersan

Emmett Browns Ghost
My Satellite Setup
IP9000HD +
TD110 Dish and TD88 Dish in Tandem
66°East to 60°West.
AZbox PrmHD + OpnbxS9HD + Skybox + DrHD F15
2x VboxII AZ-EL
2 m+ Alcoa PF + BSC421 C-Band lnbf...
+SS2/TwHnS2-3200 pci/TBS6925 pci
1.5 Fortec Star -Gbox - HtoH Ku/Ka/C
My Location
UK
Hi friends ..
Been rescanning some birds with the F15..
..and have noticed some changes to the Congo-Kinshasa mux
4052R

Symbol rate has increased to 10150
fec is still 3/4

The SR increase is to accomodate the addition of another channel plus a testcard/info channel..
rgds
VS
 

Attachments

  • cap_ch1_20110327_203135.webp
    cap_ch1_20110327_203135.webp
    59 KB · Views: 74
  • cap_ch2_20110327_203153.webp
    cap_ch2_20110327_203153.webp
    66 KB · Views: 75
  • cap_ch3_20110327_203218.webp
    cap_ch3_20110327_203218.webp
    30.4 KB · Views: 70
  • cap_ch4_20110327_203319.webp
    cap_ch4_20110327_203319.webp
    59.9 KB · Views: 69
  • cap_ch5_20110327_203343.webp
    cap_ch5_20110327_203343.webp
    37.9 KB · Views: 61
  • cap_ch6_20110327_203424.webp
    cap_ch6_20110327_203424.webp
    43.6 KB · Views: 65
hi vipersan glad you are up and running,the congo mux you are receiving is the signal very strong i did pick it up when it changed over from old sat then nothing,i pick up the 3971R 2741 and 4078R 3255 channels ok.
 
Hi Pride ..
certainly not a weak signal at my location..but it is the weakest of the 3 txpdrs
The F15 reports - 4052 R signal level @ 79% - 8.0 > 8.5db

3971R - 75% - 9.8db

4078R - 76% - 9.6db

I can get these numbers up a fraction if I peak the elevation to pinpoint accuracy ...

10db and above..
rgds
VS
 
Hi Huevos ..
thanks for the update ..
I'm fairly sure it was scanned as 3/4 on my box at the time of the changeover ..
it may have changed since ..
I'll update the scan when I return to Cband ..
Currently busy usng the mole to scan ku
rgds
VS
 
Hi Vipersan, I've been trying to to configure Technomate TM5400 to watch channels from congo on rascom but i couldn't get a signal at all, can you tell me what equipments you are using to watch this?
 
For starters you will need at least a 2m diameter dish and a c-band lnb. Possibly MUCH bigger.


If you dont have these then give up now.
 
I've got a 1.5 dish and c band lnd + conical ring but i dont just find a way of configuring the TM5400, any help there.
 
ginoscar said:
I've got a 1.5 dish and c band lnd + conical ring but i dont just find a way of configuring the TM5400, any help there.
Click to expand...
It still might be too small all the way up there. The only way to know is suck it and see. Is the LNB mounted in the LNB holder of the dish, or is it offset? The satellite is circular polarised so you will need the delay plate inserted in the mouth of the LNB. If the Technomate doesn't support C-band settings try these instead:
10929 V 2741 3/4,
10848 V 10148 5/6.
 
ginoscar said:
I've got a 1.5 dish and c band lnd + conical ring but i dont just find a way of configuring the TM5400, any help there.
Click to expand...

Not big enough :D
 
Ginostar have you had any success with your C-band kit on any other satellites yet?

For Rascom, VS and and Nelson_b both get it using 1.8m dishes but they are further south in the UK. And down here I get it fine on a 1.5m using an offset LNB.
 
Huevos said:
Ginostar have you had any success with your C-band kit on any other satellites yet?

For Rascom, VS and and Nelson_b both get it using 1.8m dishes but they are further south in the UK. And down here I get it fine on a 1.5m using an offset LNB.
Click to expand...

Huevos, still getting the same error message, I can get KU Band sat without problem at all, just want to watch channels from rascom, do you have any more suggestions? cheers
 
ginoscar said:
Huevos, still getting the same error message, I can get KU Band sat without problem at all, just want to watch channels from rascom, do you have any more suggestions? cheers
Click to expand...
Tell us more about your kit. Is the 1.5m dish used for C-band and Ku, or just C-band? Is it motorised? How do you know it is aligned? Is the C-band LNB central? Can you post some photos, it would make it easier to help you. Also what is the problem with the Technomate?
 
if you find the l.n.b. setup menu and select --- 5150 ( Standard) then it will see your l.n.b. and let you input c band transponder numbers -- and just select polarity H or V for L or R

n_b.
 
ginoscar said:
I can get KU Band sat without problem at all
Click to expand...
Which Ku satellite. Do you mean the frequencies I posted?
 
Huevos said:
Tell us more about your kit. Is the 1.5m dish used for C-band and Ku, or just C-band? Is it motorised? How do you know it is aligned? Is the C-band LNB central? Can you post some photos, it would make it easier to help you. Also what is the problem with the Technomate?
Click to expand...

Well, i usually use this dish with my KU band lnb, just bought a C band one which i'm trying to set up. the dish itself is not motorised, the aligment is done with a sat finder (I also use dishpointer.com ). The TM5400 does not allow me to input any c band Tp frequencies. about ku band i meant satellite such as astra and others. i will be able to post some photos in the morning. cheers
 
ginoscar said:
The TM5400 does not allow me to input any c band Tp frequencies.
Click to expand...
I don't know the receiver so try what Nelson suggests above for C-band settings. If you don't have any luck with that use the parameters I posted above. I know they are Ku numbers but used with a C-band LNB they are correct for Rascom.
 
nelson_b said:
if you find the l.n.b. setup menu and select --- 5150 ( Standard) then it will see your l.n.b. and let you input c band transponder numbers -- and just select polarity H or V for L or R

n_b.
Click to expand...

All i can see on the LNB settings are
LNB type: Universal, OCS, Single.
LNB power: On,13v,18v,OFF
LNB Frequency: depends on which transpond you choose

cheers
 
Back
Top