Release:- Dreambox Config Creator v0.9.0

Status
Not open for further replies.
B16MCC

B16MCC

Dreambox Gimp & Coder
Messages
1,562
My Satellite Setup
2 Dreamboxes..........
---------------------------------------------
--- DM 8000 HD PVR & DM 800 HD ---
Motek SG2100 & Triax 80cm Dual LNB
------ Fixed Dish 28e Quad LNB -------
---- Sly HD Full & 24" Apple iMAC ----
My Location
/var/tuxbox/config
Here's the latest version of the Dreambox Config creator.



Change Log :-
  • Major changes to the general GUI.
  • A new Menu form.
  • Seperate forms for each different config arrangement.
  • Added the ability to add external readers (Smargo & Omnikey) in both NewCS and CCcam.
  • MGCamd config removed in this release.
  • NewCS advanced mode disabled in this release.
  • Compatible with the new CCcam 2.1.3 for Sly UK.
  • Many other bug fixes and minor improvments.

DOWNLOAD HERE.

Tutorial. How To Create A CCcam.cfg

1. Setup the basic information as below.



2. Click start to move to the config creation form.



3. Selec the preset you want to use, EG Sly UK.
4. Select reader and speed.
5. Create a boxkey if required.
6. Use the $ buttons to copy the created boxkey to each reader.
7. Always press the 'Preview' button to show the current config settings.
8. After preview is shown , click 'Create CCcam.cfg'
9. Select save location.
10. Once saved you can now click 'FTP CCcam.cfg' to send the config to your Dreambox.



11. Always read the status bar at the bottom of the form for useful information.


Use the menu button to return to the settings menu.

Please report any bugs you find and if you find this useful please use the thanks button.

Enjoy...
 

Attachments

D

dreadstar

Member
Messages
1
My Satellite Setup
DM600pvr, DiSEqC 4 way Switch, Triax 80, 3 LNBs (28E,19E,13E).
My Location
Bristol, UK
Does the config on this allow the correct updates to the white sky card to stop me having to put the card in my sky digibox once a month? If so what is the diff between the versions of your generated config that did not have this?

Cheers!!
 
D

dreadstar

Member
Messages
1
My Satellite Setup
DM600pvr, DiSEqC 4 way Switch, Triax 80, 3 LNBs (28E,19E,13E).
My Location
Bristol, UK
Does the config on this allow the correct updates to the white sky card to stop me having to put the card in my sky digibox once a month? If so what is the diff between the versions of your generated config that did not have this?

Cheers!!
 
B16MCC

B16MCC

Dreambox Gimp & Coder
Messages
1,562
My Satellite Setup
2 Dreamboxes..........
---------------------------------------------
--- DM 8000 HD PVR & DM 800 HD ---
Motek SG2100 & Triax 80cm Dual LNB
------ Fixed Dish 28e Quad LNB -------
---- Sly HD Full & 24" Apple iMAC ----
My Location
/var/tuxbox/config
CCcam 2.1.3 will now update the card properly. There's no difference in the config as such, the difference is in the new version of the CCcam binary.
 
B16MCC

B16MCC

Dreambox Gimp & Coder
Messages
1,562
My Satellite Setup
2 Dreamboxes..........
---------------------------------------------
--- DM 8000 HD PVR & DM 800 HD ---
Motek SG2100 & Triax 80cm Dual LNB
------ Fixed Dish 28e Quad LNB -------
---- Sly HD Full & 24" Apple iMAC ----
My Location
/var/tuxbox/config
CCcam 2.1.3 will now update the card properly. There's no difference in the config as such, the difference is in the new version of the CCcam binary.
 
zoro25

zoro25

Attack of the Clones
Messages
169
My Satellite Setup
Dreambox 800 - Nabilosat Image and 250gig Hard-drive (pointing at 28.2E)
Dreambox 7020 with 120 gig hard-drive disk - running a motorised dish
DM600 +DM500
although only usually the 800 and 7020 are both on.
My Location
UK
Hi B16MCC is there any way this can have an update which can also read your current config file as this one creates a new one each time.

I've found when updating a file one single char in the wrong place can make an invalid file.

Otherwise could you please release the source so I can make an update. (not sure if coded in .Net) ?
 
zoro25

zoro25

Attack of the Clones
Messages
169
My Satellite Setup
Dreambox 800 - Nabilosat Image and 250gig Hard-drive (pointing at 28.2E)
Dreambox 7020 with 120 gig hard-drive disk - running a motorised dish
DM600 +DM500
although only usually the 800 and 7020 are both on.
My Location
UK
Hi B16MCC is there any way this can have an update which can also read your current config file as this one creates a new one each time.

I've found when updating a file one single char in the wrong place can make an invalid file.

Otherwise could you please release the source so I can make an update. (not sure if coded in .Net) ?
 
B16MCC

B16MCC

Dreambox Gimp & Coder
Messages
1,562
My Satellite Setup
2 Dreamboxes..........
---------------------------------------------
--- DM 8000 HD PVR & DM 800 HD ---
Motek SG2100 & Triax 80cm Dual LNB
------ Fixed Dish 28e Quad LNB -------
---- Sly HD Full & 24" Apple iMAC ----
My Location
/var/tuxbox/config
Thanks for the suggestion. It is written in VB.NET and I'm always open to suggestions to improve the util, but I won't release the source. I will ofcourse be happy to include the change for you.
 
B16MCC

B16MCC

Dreambox Gimp & Coder
Messages
1,562
My Satellite Setup
2 Dreamboxes..........
---------------------------------------------
--- DM 8000 HD PVR & DM 800 HD ---
Motek SG2100 & Triax 80cm Dual LNB
------ Fixed Dish 28e Quad LNB -------
---- Sly HD Full & 24" Apple iMAC ----
My Location
/var/tuxbox/config
Thanks for the suggestion. It is written in VB.NET and I'm always open to suggestions to improve the util, but I won't release the source. I will ofcourse be happy to include the change for you.
 
D

digitalpoggy

Member
Messages
37
My Satellite Setup
tm 9100 super, dm 800. 80cm motorised dish getting 28.2e,19e and 13e
My Location
Donegal, ireland
hi i just setup a debian server and was wondering could i ust this cfg creator for it, im using a smargo
 
B16MCC

B16MCC

Dreambox Gimp & Coder
Messages
1,562
My Satellite Setup
2 Dreamboxes..........
---------------------------------------------
--- DM 8000 HD PVR & DM 800 HD ---
Motek SG2100 & Triax 80cm Dual LNB
------ Fixed Dish 28e Quad LNB -------
---- Sly HD Full & 24" Apple iMAC ----
My Location
/var/tuxbox/config
Well firsty, this particular version is out of date now mate. Please use v0.9.4.
You could use it but you would have to modify the address of the smargo to suite a linux pc.

/dev/ttyUSB0
 
Status
Not open for further replies.
Top