Repaired Zone 2 multi LNB setup

Ghostleader

Ghostleader

Regular Member
My Satellite Setup
80cm motorised Inverto dish with Dark Motor full metal gears, Xtrend 9500HD, Amiko Alien 2+, Amiko Alien 8900, Moded Zone 2 dish with multi LNB goodness! 50 inch full HD LCD and loads of other stuff! lol
My Location
Glasgow,ish!
Rather than a trip to Aldi I repaired my Zone 2 setup:

IMG_20180420_183642_zpslfi4ny0y.webpIMG_20180420_183405_zpsq6geyy5a.webpIMG_20180420_183340_zpsh27grcp0.webpIMG_20180420_183437_zps7gxehacy.webpIMG_20180420_183543_zpsoezh8fxq.webp
 
Kit used, old Zone 2 $ky/Freesat dish, ISS Original LNB holder, Triax TD series multi LNB kit, new RG6 patch cables, 3 IBU LNBs ( There's a dual feed went a missing in the house somewhere, 4 specialised coach anchors and matched plugs by Rawl for cladded walls and one mug of Yorkshire Tea (Best tea bags money can buy).

EDIT: (missed diseqc switch) I used a four port Titanium switch I had in the spares box and a reclaimed cover from another switch.
 
Last edited:
Chris1979 said:
What sats are you on?
Click to expand...

Its 13E,19E & 28E, with the ports being used in order 1,2,3 (Always done that, climbing order that is).
 
Today just reminded me how absolutely terrible the revised Zone 2 mount for these dishes are, the "n" shaped wall mount is far too thin to have one long side missing completely, I ended up tightening it until the "u" clamps started squishing the "L" pole before I stopped being able to twist the pole round (like cranking a handle motion thus making the dish non level).
 
Back
Top