Replacing motorised system

A

Alex2

Member
My Satellite Setup
old anologue nokia box with 1 meter dish. Planning to go digital
My Location
Leicester
I am thinking about replacing my actuator has it has seen better days.
I am interested in the Technomate TM-2600 Super Motor. Will it fit without modification to a 2 1/2" pole. Without modification. And a suitable 1 meter and box to operate it, if my clone receiver has not enough power to do it. I have been looking for a pdf for this.
 
just fit a new actuator and use a vbox with the receiver ?

do you have a picture of the dish setup ?
 
The TM 2600 motor should fit the mast but agree replace the actuator and add a Vbox.

Your mast is 63.5 mm and the TM2600 will accept upto 65mm I believe.
 
At the moment I have not got a picture. I'm going to free the actuator next week. If I can move the dish freely . I will replace the actuator and obtain a vbox. At the moment I use the dish on 19.2 E. I used to use it for Astra and Filmnet on anologue, until they went digital. Is there any recommendations on these : 10" actuator , vbox and a o.1 twin LNB and a good place to buy.
 
Alex2 said:
Is there any recommendations on these : 10" actuator , vbox and a o.1 twin LNB and a good place to buy.
Click to expand...



Try our site sponsors, most should stock all you need.

Look forward to the uploaded pictures.
 
Back
Top