Review of the latest koqit satellite receiver

MarsBar

Member
My Satellite Setup
Technomate 3100, Universal LNB, 85cm dish, motor go to X
My Location
NORWAY, Karmøy
Review of the latest KOQIT satellite receiver from E-bay

This is probably the latest model as it arrived in my mail this week.

(I will write a review of my other KOQIT later)

So, at £25 what can you expect?

****Power supply:****

The power supply is now built in. Power supply seems fair and safe enough. There is a fuse and combined resistor just before the rectifier bridge.
There is isolation distance. No mains filter. Not sure if it's needed. Seems fair enough for EU market.

****Remote:****

The remote worked poorly, I re-located the IR sensor because the buttons blocked the signal. Warning: Cut IR sensor legs at it does not withstand much heat, I broke it de-soldering it. (I took an IR sensor from a non working receiver in my junkbin)

Result: Remote works not normally.

The remote have it’s button re-aligned, so it’s not compatible with previous remotes used on KOQIT! (Shame, since I have many...)

****Menu system, software:****

Menu system seem to work ok

Subitiles on BBC now works without hiccup, no problem

Software jammed on choosing Sky News, had to turn on-off (Happens sometimes)

****Media playback:****

Seem to work fine

****Sound / Picture:****

Sound is superb, so is picture in HD.

USALS Goto X: Tested, but motor goes back to PREVIOUS position after a new scan, so you think it don’t work at first! You have to drive the motor back again after a new scan… Bug?

Conclusion: Seems to work OK, but I have not tested all of the software

****Minus:****

Link to Red Tube in Apps (Not family oriented!)

---end of review---

Anyway, I discovered MEGASAT had a line of receivers, resonably priced here in Norway from £60. Better choice?
 

Attachments

  • 1.webp
    1.webp
    219.9 KB · Views: 20
  • 2.webp
    2.webp
    156.1 KB · Views: 20
  • 3.webp
    3.webp
    64.3 KB · Views: 18
This is new, I got it a week ago. It replaced a reveiver I fried trying to update by USB. It was the wrong software, now it's dead. Possbly going to make a own tread on my KOQIT receivers. And my dead KOQIT receiver... They are very myserious... same same but different...
 
Take more pictures of the internals and front panel. Take the lid off the tuner if you can
 
A writing mistake, it should be remote now works okay. (Nor should be now!)
 
Back
Top