Dujadin
New Member
- Joined
- Nov 23, 2020
- Messages
- 6
- Reaction score
- 0
- Points
- 1
- Age
- 39
- My Satellite Setup
- Rover Master stc
- My Location
- Brisbane
Hi, I have a rover master stc, and lately it started playing up, I was hoping someone will know what is going on with it.
The problem is with logger save. When I am next to the dish and testing signal on one transponder (while I'm positioning the dish) it works no problem, but when I am testing signal on the wall plate and try to run logger save it doesn't work, sometimes I get no reading, sometimes I get reading on first two or three transponders but nothing on the rest of them.
Also, when there is a multiswitch connected I get no reading at all, If no receivers/decoders are connected. But if there is a receiver/decoder connected on one wall plate, and I test the other wall plate it works ok.
It looks like there is a problem with power, as if my meter can not send enough power to lnb. I thought it was something wrong with the battery, so I bought a new one and installed it, but it was the same, nothing changed.
I'll also mention that there is no problem with the dish or lnb or cable, because I have another meter and when I use that one everything works fine.
I hope someone will have some answers to my problem, thanks in advance.
The problem is with logger save. When I am next to the dish and testing signal on one transponder (while I'm positioning the dish) it works no problem, but when I am testing signal on the wall plate and try to run logger save it doesn't work, sometimes I get no reading, sometimes I get reading on first two or three transponders but nothing on the rest of them.
Also, when there is a multiswitch connected I get no reading at all, If no receivers/decoders are connected. But if there is a receiver/decoder connected on one wall plate, and I test the other wall plate it works ok.
It looks like there is a problem with power, as if my meter can not send enough power to lnb. I thought it was something wrong with the battery, so I bought a new one and installed it, but it was the same, nothing changed.
I'll also mention that there is no problem with the dish or lnb or cable, because I have another meter and when I use that one everything works fine.
I hope someone will have some answers to my problem, thanks in advance.