rs232 cable(null)

m.a.s.75

Regular Member
Messages
46
Likes
0
#1
can i use my rs 232 cable(null) from humax 5400z for puting images and other stuff on dream7000,channels,keys....

thnx
 

djlemur

Regular Member
Messages
113
Likes
0
Location
Hampshire, UK
My Satellite Setup
DM7000 + 300Gb + Gemini, HH100 Rotor, 0.8m Offset Dish, 0.3db Invacom LNB
My Location
Hampshire, UK
#2
m.a.s.75 said:
Can I use my rs 232 cable(null) from humax 5400z for puting images and other stuff on dream7000,channels,keys...
As long as it is a "standard" NULL model cable, you can use it to telnet into the box + transfer data (albiet slowly). An ethernet cable is a much faster way to go.

If you want to check you cable pinout try http://www.null-modem.com/NullModem.htm for a diagram.
 
Messages
18
Likes
1
#3
DJLEMUR
goed after noon
IF YOU PLIES CAN YOU SAY FOR ME WHO CAN I MAKE A CABEL rs 232 cable OF(nullmodem cabel ) to ethernet cable
and mach thankfor you............................................
mohammed
 

haggard

Regular Member
Messages
467
Likes
0
My Satellite Setup
7000S - 300GB Maxtor
1GB USB -
Syslink wifi bridge from DB to Syslink wifi router to Apple Extreme streaming relay to Apple G5, 2 xG4.
Elgato into G4 17 in for Apple DVB-T captures.
Panasonic 42 HD ready
My Location
NW England
#4
Mohammed el Hassan said:
DJLEMUR
goed after noon
IF YOU PLIES CAN YOU SAY FOR ME WHO CAN I MAKE A CABEL rs 232 cable OF(nullmodem cabel ) to ethernet cable
and mach thankfor you............................................
mohammed
\

Mohammed
It is not totally clear what you want to do. Excuse if this is obvious:-
If you are into this satellite business, a null modem cable is so cheap that you should not consider making one. Buy one. You then connect the serial port of your PC to the serial port of your receiver. You then communicate via the com port of your PC.
An ethernet cable is something different and you need this if you are talking to the receiver on your local area network (LAN) or connecting it directly to PC using a CAT5 cross-over cable.
Your question almost sounds as if you want an RS232 at one end and ethernet at the other. Did you mean this?
 

m.a.s.75

Regular Member
Messages
46
Likes
0
#5
i was meaning on using only null cable for inserting images,flashing,updating keys,setings...ect IS IT POSIBLE

i dont have enternet card so i want to use null kable rom my humax 5400z for those things
 

djlemur

Regular Member
Messages
113
Likes
0
Location
Hampshire, UK
My Satellite Setup
DM7000 + 300Gb + Gemini, HH100 Rotor, 0.8m Offset Dish, 0.3db Invacom LNB
My Location
Hampshire, UK
#6
You can use the NULL modem cable to flash images, and manually edit keys, etc.
 

john_graydon

Specialist Contributor
Messages
2,219
Likes
3
My Satellite Setup
Azbox premium HD+,Dusty Dreambox 7000s,& Sky HD.
My Location
Dublin....Ireland
#9
m.a.s.75 said:
can you please tell me which program is fr what ?????
1.dreamup .....????
2.
3.
4.
thnx
You can use dream up to flash images with your null cable, very slow this way.
 
Top