rs232 cable(null)

[m.a.s.75]

can i use my rs 232 cable(null) from humax 5400z for puting images and other stuff on dream7000,channels,keys....

thnx

 

[djlemur]

Can I use my rs 232 cable(null) from humax 5400z for puting images and other stuff on dream7000,channels,keys...

As long as it is a "standard" NULL model cable, you can use it to telnet into the box + transfer data (albiet slowly). An ethernet cable is a much faster way to go.

If you want to check you cable pinout try http://www.null-modem.com/NullModem.htm for a diagram.

 

[Mohammed el Hassan]

DJLEMUR
goed after noon
IF YOU PLIES CAN YOU SAY FOR ME WHO CAN I MAKE A CABEL rs 232 cable OF(nullmodem cabel ) to ethernet cable
and mach thankfor you............................................
mohammed

 

[haggard]

DJLEMUR
goed after noon
IF YOU PLIES CAN YOU SAY FOR ME WHO CAN I MAKE A CABEL rs 232 cable OF(nullmodem cabel ) to ethernet cable
and mach thankfor you............................................
mohammed

\

Mohammed
It is not totally clear what you want to do. Excuse if this is obvious:-
If you are into this satellite business, a null modem cable is so cheap that you should not consider making one. Buy one. You then connect the serial port of your PC to the serial port of your receiver. You then communicate via the com port of your PC.
An ethernet cable is something different and you need this if you are talking to the receiver on your local area network (LAN) or connecting it directly to PC using a CAT5 cross-over cable.
Your question almost sounds as if you want an RS232 at one end and ethernet at the other. Did you mean this?

 

[m.a.s.75]

i was meaning on using only null cable for inserting images,flashing,updating keys,setings...ect IS IT POSIBLE

i dont have enternet card so i want to use null kable rom my humax 5400z for those things

 

[djlemur]

You can use the NULL modem cable to flash images, and manually edit keys, etc.

 

[m.a.s.75]

can you please tell me which program is fr what ?????
1.dreamup .....????
2.
3.
4.
thnx

 

[m.a.s.75]

So No One For This One

 

[john_graydon]

can you please tell me which program is fr what ?????
1.dreamup .....????
2.
3.
4.
thnx

You can use dream up to flash images with your null cable, very slow this way.

 

[m.a.s.75]

what about channels,puting keys, and other stuff can i dio that with null