S*Y Sports and MGCamd v1.30d and newcs v1.60

[stvy]

Hi,

I am running a DM800 with gemini v4.1 and with my s*y card. I have a subscription to a variety of channels, all clear except for S*y sports both SD and HD. It used to clear but about a month ago stopped. If I put the card back in my skyhd box all the channels clear.

I have downloaded via the blue button a later version of mgcamd v1.3# and newcs v1.65. If I switch to that cam none of my pay channels work. I am running v1.30d and newcs v1.60.

Is there anyone clearing s*y sports with newcs and mgcamd?

Are there any changes to the configuration files with the later versions of newsc and mgcamd?

Thanks,

Stvy

 

[stvy]

Hi,

Is their no one out there with a DM800 and a S*y sports sub?

I am going to order a smargo smartreader to try ccam. I would however really like to find a fix for newcs and s*y sports...

Cheers,

Stvy

 

[tomthebomb1968]

I have but i use CCcam. With the latest drivers you can read the card from the 800 internal reader. No need for CCcam and Newcs now

 

[stvy]

I have but i use CCcam. With the latest drivers you can read the card from the 800 internal reader. No need for CCcam and Newcs now

Hi,

Could you please let me know:

1. which version of CCcam
2. What these "drivers" are.

Thanks,

Stvy

 

[tomthebomb1968]

Any version of CCCam works, Im using 2.011
The latest drivers pack is
dreambox-dvb-modules_20090310-r0_dm800.ipk

 

[sinjin_smythe]

Nice one! Upgraded to 2.0.11 last night using the driver pack, glad the card reader is working on its own now - cheers for the info!

 

[stvy]

Any version of CCCam works, Im using 2.011
The latest drivers pack is
dreambox-dvb-modules_20090310-r0_dm800.ipk

Hi,

Ok at the risk of sounding thick.... Where can I download that driver pack? Or is it included in gemini v4.1?

I have tried _www.i-have-a-dreambox.com and cant find it.

Thanks,

Stvy

 

[sonic1]

Here are the drivers, un rar the file, ftp the ipk file to tmp and install via manual addons.

Tested and working on Nabilo Bh 0.9 with bootloader 72r1

@admin these are just drivers and not software or anything to do with images. Hope it's ok to post?

 

[xXGJSXx]

Here are the drivers, un rar the file, ftp the ipk file to tmp and install via manual addons.

Tested and working on Nabilo Bh 0.9 with bootloader 72r1

@admin these are just drivers and not software or anything to do with images. Hope it's ok to post?

Thanks for this, my cards all working ok now in my D800 for the first time since buying it.
Cheers

 

[tlj999]

Hi,

I am trying to get Sly card to work in DM800.
I have unpacked and FTP'd the ipk file to tmp.
When I go to manual addons and run the file I get the following:

ERROR: cannot satisfy the following dependencies for dreambox-dvb-modules:
dreambox-second stage

Anybody got any ideas.

Regards,
Tom.

 

[B16MCC]

You need to update your second stage loader first.

Here's the latest version.

 

[tlj999]

Thanks B16MCC,

is the procedure the same for the bootloader,
i.e. unzip, FTP to tmp then install manually.
Then would I need to reboot?

regards,
Tom.

 

[tlj999]

I have updated my secondstage loader and installed the driver pack dreambox-dvb-modules_20090310-r0_dm800.ipk.
Both installed successfully but Sly card still didn't work so I restarted Dreambox.
Dreambox won't boot up now. :-Nooo
All I get is the Gemini logo and nothing else.
What can I do?

 

[phazblade]

Is there an error message on the Dreambox Screen ?

I have been following this thread, when I updated the Secondstage my Dreambox would not reboot and had an error message on the Front Panel Screen. !

I ended up re-flashing the Secondstage Loader with version #69, via Dreamup and a Serial Cable and it rebooted ok.

It looks like mine will not accept anything past #69, can, worms of, open ....

 

[tomthebomb1968]

Is there an error message on the Dreambox Screen ?

I have been following this thread, when I updated the Secondstage my Dreambox would not reboot and had an error message on the Front Panel Screen. !

I ended up re-flashing the Secondstage Loader with version #69, via Dreamup and a Serial Cable and it rebooted ok.

It looks like mine will not accept anything past #69, can, worms of, open ....

Sounds like it a clone then, they wont take anything above 69

 

[phazblade]

Sounds like it a clone then, they wont take anything above 69

That was the can of worms I referred to, I had my suspicians, but this is the clearest symptom to date, but other than this, it does do what it says on the box

It might be the subject of another thread, mildly flaming you could say, maybe one day, but not there yet.

 

[tlj999]

Hi all,
I have had to reflah my box to get it working.
As I couldn't get signed up to the Nabilosat site, I had to reflash with Gemini 4.1.
I got it up and running again but still no Sly card.
I hope I haven't got a clone as I bought it from Mark at Satstore which was recommended by members of this forum.
I'm going to try and get the Black Hole image. I'll keep you updated.
Regards,
Tom.

 

[tomthebomb1968]

Heres the rapidshare link Tom

_http://rapidshare.com/files/202514815/NabiloBlackHole_DM800_09.zip

 

[tlj999]

OK,

I am going to attempt to run Nabilosat BH 0.9 from USB. ( thanks for the link Tomthebomb ).
Do I first flash DM with Nabilo pureflash_25FEB09 or should I flash with Oozoon lean_20090207.
Do these contain Barry Allen?
I have a 2GB Bytestore USB pen. Will this work?

Any help or advice will be graetfully appreciated.

Regards,
Tom.

 

[phazblade]

I use Pureflash 10 Dec 08 it works fine for me, it installs Barry Allen itself.

I have 6 images on a 2GB USB Stick, and there is room for as many more again.

But to be honest, if you are having troubles, going down the Barry Allen route may just confuse things.

Fire the Nabillo 0.9 straight in, install and scan 1 Satellite, install the Update Module, reboot and check all is well.

Then you have to decide if you wanna install the #72 bootloader, I would just to see if it does work