Setting a Fixed Dish and a Motorized Question!!

[pixxotta]

Hey Guys

Currently I have 2 dishes, 1 that is fixed with 2 lnb's for Hotbird and Astra and the other is motorized.

From the motorized, I have a wire that goes into the diseq switch on the fixed dish, so that if the Motor is on say 28.2E, the decoder on the fixed dish can also see that satellite, however obviosuly you cant turn the dish

What I need is, the settings the dm600 (FIXED DISH) must have. At the moment they are:

Non Standard User defined

Hotbird : LNB 0 A/A
Astra : LNB 1 A/B

 

[Huevos]

You need a 4 port switch wired like this: Receiver => motor => switch. 1 port to motorized LNB, and two ports to the LNB's on the fixed dish.