Settings needed!

Oscar123

Member
My Satellite Setup
Pioneer DBR-S100nl with 60cm dish, duo LNB setup for CanalDigital.
60cm flat dish under test with switch.
My Location
Near Amsterdam, Holland
Dear All

I'm living in Holland and would like to receive the FTP UK channels. Understand they come from the Astra 2D (28.2E) but I can't seem to find it.

The receiver I use (older Pioneer, DBR-S100NL) together with the 60cm dish should be capable of picking it up from the air. But i'm a bit struggling with the LNB setup.

Can anyone tell me what the exactl settings are?

I've set it up like this:

Band: KU
Frequency: 10773
LNB l.o. freq: 10600
Polarisation: H
22Khz : on
Symbol rate: 22000
FEC: 5/6

Can anyone tell me if this is correct? I have the feeling that this is my problem...:mad:

Thanks!
 
To receive that frequency the 22kHz would need to be off and the LO setting should be 9750, assuming that you have a universal LNB?

On my receiver I just tell it that I have a universal LNB and it sorts out the 22kHz and the LO frequency by itself.
 
Thanks! that realy helped!

Qustion:
Are there any more FTP UK satelite channels I could receive?
Sadly from the almost 400 channels, only a few are FTA. Or... I need to get myself a Sky membership of course... but if that is what I want? :-DOH2

Looking for English language channels with info or movies.
Would anyone know if there is a satelite where Discovery and Animal planet are FTA?

Thanks!
 
Check on lyngsat for what is on the rest of 28E, there are quite a lot of FTA channels.

If you select packages on lyngsat, you can see what Sky have to offer. Normally a dedicated box and a UK address is needed.

I noticed Animal planet was FTA on a satellite last night, can't remember which one, I'll check later.
 
Robbo71 said:
Check on lyngsat for what is on the rest of 28E, there are quite a lot of FTA channels.

But isn't it true, that when you select these frequencies all the channels are automatically seen when you search for them? I did a complete search, about 400 where seen but of course only a few of them are visible due to wrong keys etc.
(also a few not visible like the "elvis channel" apperently they are different in modulation or so.)

Or is it possible to select a different freq. let say 10758 and do a new scan with more channels. (Are all other settings the same than?)

Need to connect second LNB to the switch than, as I use a flat panel for this. Currently I'm testing this panel but sofar with good performance;)

Thanks
 
Oscar123 said:
But isn't it true, that when you select these frequencies all the channels are automatically seen when you search for them?
Not really sure what you are saying here, it depends upon your stb and what scanning mode you are using. For example my stb has the option to include scrambled channels or exclude scrambled channels when scanning
Oscar123 said:
I did a complete search, about 400 where seen but of course only a few of them are visible due to wrong keys etc.
(also a few not visible like the "elvis channel" apperently they are different in modulation or so.)

It has little to do with keys and more to do with encryption, NDS is not compromised therefore cannot be viewed without a subscription unless you are watching an FTA channel

Oscar123 said:
Or is it possible to select a different freq. let say 10758 and do a new scan with more channels. (Are all other settings the same than?)

Again this is dependant upon your stb, some allow 'blind' scanning which should find all channels across the spectrum, others only allow scanning particular frequencies
 
Can you get all FTA channels from 28E? if so you have everything set up OK. If not, you will ned to recsan the relevant transponders and possibly add missing ones, unless you have blind scan as Topper says.

Must have made a mistake, I have no FTA Animal planet after all.:-rofl2
 
Robbo71 said:
Can you get all FTA channels from 28E? if so you have everything set up OK. If not, you will ned to recsan the relevant transponders and possibly add missing ones, unless you have blind scan as Topper says.

Currently not at the receiver so I can't tell which channels I have for the full 100% and it depends on what are "ALL" the FTA channels?

I can see the BBC channels and some ITV channels but not one SKY, Elvis channel, or the car manufactorer channels who seems to have its own channel (Believe it is Dodg or Chrysler or something)

My Pioneer DBR-S100nl did a scan on several transponders and came up with 300+ channels. Yes I can scan for TV channels only, but still it mixes up with data and radio channels as well. Not a problem, I fit them in somewhere and remove when not interested. U-zzz

If this sounds like the FTA UK channels than so be it. I have some friends in the UK, perhaps I can ask them for a Sky membership, but than I need Sky reception first.

Or is Sky also FTA somewhere?

Mmm what can I say...:confused:
 
Topper said:
Not really sure what you are saying here, it depends upon your stb and what scanning mode you are using. For example my stb has the option to include scrambled channels or exclude scrambled channels when scanning


It has little to do with keys and more to do with encryption, NDS is not compromised therefore cannot be viewed without a subscription unless you are watching an FTA channel

Keys are needed for decription! :-rofl2 Without keys, no TV, or you need a subscription of course, but I'm not directly after an other subscription for the amount of TV I watch. Ohh and I'm not a hacker or so, I just want some UK channels because I don't speak Italian, French and hate the German voices under US movies!:-Nooo

I only have a Dutch CanalDigital subscription and because there only a few Dutch channels available I'm looking for English spoken FTA channels. (preferably BBC, ITV, SKY and channels like Discovery and Animal Planet)


Again this is dependant upon your stb, some allow 'blind' scanning which should find all channels across the spectrum, others only allow scanning particular frequencies

I do a complete scan on the Astra D (28.2E) channel. System (Pioneer DBR-S100NL) found several transponders and up to 300+ channels. Most of them are not displayed due to subscriptions I think. All channels, including the "invisible" ones are included after storing them.
 
Ohh ehh, would it be better to receive the Hotbird satelite perhaps? If I want the FTA channels for the UK, would that be possible?

What are the settings for the LNB/Receiver?

Thanks!
 
No, the FTA English channels are on 28E.

If you go through your transponder list, and check you have all those that are listed for 28E on Lyngsat, you will see if you have any transponders missing. Any that you have missing that carry FTA channels that you want, then you need to add them. Then scan. There are far more than 300 channels on 28E, but as you say most are encrypted. But a fair few are not. Lyngsat lists all the FTA ones with a red F in column 5 I believe.
 
Thanks for your answer. Perhaps I need to remove some of the channels, as the Pioneer only is capable of receiving 2000 channels.
And than do a rescan.

Just in case I want to receive the Eurobird (to see what is on there) can you tell me the settings for the receiver? (Freq, LNB L.O. Freq, etc):-worship

thanks!
 
_http://www.lyngsat.com/eb1.html
 
Thanks but I need Band, Freq, LNB L.o. freq, Polarisation, etc info
And to be honest, I can't read that from that page....
 
Frequency & polarisation are shown on the above website.

10.700 - 11.700 Ghz = low band LO 9.750
11.720 - 12.750 Ghz = High band LO 10.600

:)
 
The Frequency and polaristion are shown in the first column.
 

Attachments

  • lyngsat.webp
    lyngsat.webp
    47.2 KB · Views: 26
The channel name 2nd column :)
 

Attachments

  • untitled.webp
    untitled.webp
    103 KB · Views: 28
Thanks! That realy helps!!!
Will try it later.
 
Back
Top