fintannl
Regular Member
- Joined
- Jan 11, 2009
- Messages
- 257
- Reaction score
- 0
- Points
- 0
- Age
- 48
- My Satellite Setup
- Single Sat Dish and DM800
- My Location
- Ireland
Can you confirm the folowing setup which would be using the internal card reader of the dreambox and having 5 users sharing the card in that dreambox.
The server will have a CCCAM cfg file with the following lines only
SERVER LISTEN PORT : 12000
BOXKEY: /dev/sci0 00 11 22 33
F: user1 pass1 0 0 0 {0:0:1}
F: user2 pass2 0 0 0 {0:0:1}
F: user3 pass3 0 0 0 {0:0:1}
F: user4 pass4 0 0 0 {0:0:1}
F: user5 pass5 0 0 0 {0:0:1}
which will allow all five users to access the card but will not allow any of these 5 users to reshare further.
Then each client will have only one line in their CCCAM cfg which will be
Box 1
C: dreamboxip 12000 user1 pass1 no
Box 2
C: dreamboxip 12000 user2 pass2 no
Box 3
C: dreamboxip 12000 user3 pass3 no
Box 4
C: dreamboxip 12000 user4 pass4 no
Box 5
C: dreamboxip 12000 user5 pass5 no
And that should be it. Correct?
And then if we were to decide to use a smargo instead of the internal card reader you just add
SERIAL READER : /dev/ttyUSB0 smartreader+ into the server CCCAM cfg file
Anything else or am I oversimplyfying
The server will have a CCCAM cfg file with the following lines only
SERVER LISTEN PORT : 12000
BOXKEY: /dev/sci0 00 11 22 33
F: user1 pass1 0 0 0 {0:0:1}
F: user2 pass2 0 0 0 {0:0:1}
F: user3 pass3 0 0 0 {0:0:1}
F: user4 pass4 0 0 0 {0:0:1}
F: user5 pass5 0 0 0 {0:0:1}
which will allow all five users to access the card but will not allow any of these 5 users to reshare further.
Then each client will have only one line in their CCCAM cfg which will be
Box 1
C: dreamboxip 12000 user1 pass1 no
Box 2
C: dreamboxip 12000 user2 pass2 no
Box 3
C: dreamboxip 12000 user3 pass3 no
Box 4
C: dreamboxip 12000 user4 pass4 no
Box 5
C: dreamboxip 12000 user5 pass5 no
And that should be it. Correct?
And then if we were to decide to use a smargo instead of the internal card reader you just add
SERIAL READER : /dev/ttyUSB0 smartreader+ into the server CCCAM cfg file
Anything else or am I oversimplyfying