The..pieman
Member
- Joined
- Oct 30, 2010
- Messages
- 8
- Reaction score
- 0
- Points
- 0
- Age
- 61
- My Satellite Setup
- Panasonic 2.1.z Sky Box
- My Location
- Leighton Buzzard, Bedfordshire
Hi...I have a problem with the signal strength on my Panasonic sky digibox. The signal strength is at 100% but the signal quality is only on 50%. I have used a meter to align the dish to the best angle and the signal quality did bump up from around 40% to what it is now:50%..
system details are as follows:
Panasonic model: 2.1.Z
Version: 0029421911
Operating System Version: 1.2S4FM
EPG software: 3.8.8
Obviously that all means nothing to me so some advice would be helpful.
The main problem is every 2-3 minutes the pictures get pixelated in the middle and I get an annoying noise as it does this.
Bit of a pain whilst watching a programme..
I must add that the system was ready here in the house when I brought it 7 years ago.
Any help would be appreciated...
system details are as follows:
Panasonic model: 2.1.Z
Version: 0029421911
Operating System Version: 1.2S4FM
EPG software: 3.8.8
Obviously that all means nothing to me so some advice would be helpful.
The main problem is every 2-3 minutes the pictures get pixelated in the middle and I get an annoying noise as it does this.
Bit of a pain whilst watching a programme..
I must add that the system was ready here in the house when I brought it 7 years ago.
Any help would be appreciated...