single feed lnb,motorised dish and two recievers

[Magnu420]

hi all in a few weeks i will be (hopefully) instaling a motorised satellite
set up,ive got a mesh type 85cm dish (in good condition),gonna get a technomate 2600 motor,a technomate lnb,and ive got 2 dreamboxes
both are 600 pvr,is it possible for both the dm600 to be connected
to the motor on the dish,i want both boxes to control the dish but not
at the same time,during the daytime the box downstairs will be used,
in the evening and night time the box downstairs will be off and the box
upstairs will be used to control the dish,is they any kind of splitter box
that will connect 2 dream boxes to the motor, or is they another way
to do this

tia...

 

[A nonymous]

http://www.pulsat.com/products/Manual-Satellite-A%7B47%7DB-Switch.html

There you go mate, that should do it. I would make sure both receivers are on standby when switching between receivers. Not sure how sucessful this would be but its the only way i can think how to do it

:-beer

Nano

 

[satelliteman]

In addition, the IF loop through can be used on several receivers for the above described set up, not yet tried it on a DB.