Sky & Asrta 1 on same dish

S

sirreco

Member
My Satellite Setup
Sky HD
My Location
BE
Hello

I currently have 2 dishs and 3 receivers.

One dish qith a quad LBN used for SKY HD (2 outputs) and one Free to Air Skydigibox (1 outbut) leaving one output unsed on the LNB. Then I have another Dish pointing to Astra 1 + Hotbird using a Dual LNB with one output used for Globo TV receiver.

My question is, is there anyway that I could combine these 2 dishes serving the same 3 receivers.

I have been digging around but I am quite unexerienced with the subject. I saw on the market here that they have a dish/LBN combo system called TechniSat Multytenne that can be used to receive signals from these diferent Satelites, but they only have a version with 1 or 2 outputs on the LNB.

If I buy the one with 2 outputs would it be possible to use one output for the Globo receiver and another with a switch serving box Sky boxes?

If not is there any alternative, would be possible to somehow to keep and use both of my current LNBs on the same dish then having all the output I current need?

Thanks for any information.
 
you could get a dish like the triax and use one of them multi lnb brackets for 13,19 and 28e with that spread you can use quad lnbs on each if you need to.

lnbs for 13 and 19 can go through a diseqc switch to the receivers and keep the sky feeds separate going straight to the receiver as they don't work through diseqc switches.
 
You could try an extra LNB on your existing dish, it might work, depending on the size.
 
Back
Top