sky card

pacman64

Member
My Satellite Setup
fortecstar 1.5m offset dish- technomate gold quad .03db +dreambox 500s + technomate 5400 super , golden interstar pvr
My Location
spain
Hi guys
just need a bit of info if poss
i purchased a sky system some while ago now it was a one off payment of £150.00 and i got several sky progs . since then i have now got a technomate 5400 CI super box which i want to put my card in i have readers and cams but am unable to read the card , my question is can anyone tell me what sky progs i used to get with this card (it is a while since i last used it) cheers
 
Five, Fiver / +1 , Five USA / +1, Sky 3, Setanta Sports News. Plus C5 on a sky box.

If its not been used for a while it will have missed its stay alive signals and wont be active anyway, so reconnect your sky box put the card in and leave it a few days.

You will need a Dragon / Trex type cam to read the card in the TM.
 
thanks for the info will give it a go :)
 
Analoguesat said:
Five, Fiver / +1 , Five USA / +1, Sky 3, Setanta Sports News. Plus C5 on a sky box.

If its not been used for a while it will have missed its stay alive signals and wont be active anyway, so reconnect your sky box put the card in and leave it a few days.

You will need a Dragon / Trex type cam to read the card in the TM.

Hi Thanks for the info
have connected the sky box up checked it through it defaults to 11788V but then says no signal have read on the forums regarding trying another TP which i done 12207V did a search it found sky news i ok d it but cannot receive anything then when i checked it defaulted back to 11788V so have left it switched on for a while any ideas from now please?
 
Don't follow you Analoguesat. What is this 11.720? Sky box default is 11.788.
 
The default is 11.788, that is what skyboxes revert to automatically. Anything else has to programmed in and cannot be described as default surely. I use 12.129 in Spain, as 11.788 gets nothing.
 
pacman64 said:
Hi Thanks for the info
have connected the sky box up checked it through it defaults to 11788V but then says no signal have read on the forums regarding trying another TP which i done 12207V did a search it found sky news i ok d it but cannot receive anything then when i checked it defaulted back to 11788V so have left it switched on for a while any ideas from now please?


box will not stay on 12207V havnt checked today so far as i left around a friends on his dish , will check with him manana
but is there a way i can keep the box tuned to 12207?
 
pacman64 said:
box will not stay on 12207V havnt checked today so far as i left around a friends on his dish , will check with him manana
but is there a way i can keep the box tuned to 12207?

No - if the box gets the merest sniff of the north beam it will immediately revert
 
Hi yep checked the box today card has reactivated great stuff thanks everyone
 
its been off for nearly 3 years so am more than pleased
 
irart said:
The default is 11.788, that is what skyboxes revert to automatically. Anything else has to programmed in and cannot be described as default surely. I use 12.129 in Spain, as 11.788 gets nothing.

Well I take your point, but once programmed, it is then the default transponder (unless it changes back), plus that is what it is called in the digibox menu.:)
 
Most boxes revert back to 11.778(usually after power off then on again) but there were a couple or so that would remember the frequency you input manually,I think the panasonic t-30 was one.
Strange that over here also the 11.778 has been quite weak during the day lately,especially Paphos
 
pacman64 said:
its been off for nearly 3 years so am more than pleased

Unfortunately it will soon no longer be working due to the card swap, but then most of the channels on the card will be free anyway...
 
Cupart said:
Unfortunately it will soon no longer be working due to the card swap, but then most of the channels on the card will be free anyway...

Five, Fiver / +1 , Five USA / +1, sky 3, Setanta Sports News

No sign of any of them going fta in the near future
 
Guys need your advice please

I am having FFS card but unfortunately my amstrad digibox broke down. Card hasn't been used for a couple of months now but I inserted it in my Kathrein linux (Enigma2) box and noticed that only Setanta News started showing although Fiver, Five USA, SKY3 are black. Any ideas why only Setanta News goes well but the others don't?

Will Enigma2 box reactivate my card?

Thanks in advance for replies.
 
Leave it overnight switched on and on Astra 28.2 and hopefully the card will update.:)
 
Back
Top