sly problems on some ppv channels

[tony13]

Can someone help me please, I have just purchased a d/m 800 and it works fine now,I did have a few problems setting up my diseqc switch to work on a 4 dish setup , but I managed to get it working in the end,also there is a problem with the power supply connection which apears to be a little lose inside the d/m but my supplier is going to replace that for me asap.
I need a little help with some missing channels which are the ppv ones which I pay for along with my full sly subscription including hd,I am using the nabilo black hole ver 3 using 209 and new/cs 1.62 ,with the latest channel settings,and I can open everthing including the hd channels the problem I have is I am missing MUTV, and some adult channels which I pay for,I know my channel list is ok as I use the same list in my 7020 and I can open all those missing channels,I have to use the old newcamd 5.28 to open everything on my 7020 but on my 800 these channels just wont open,is there any setting in the config file I can change to get these channels open or any other e/m I can use that will open these channels on my 800.

regds

 

[sblinx]

hey tony

try and find a channel list purposely for the 800 as the settings are different from the 7020 - especially for HD channels

 

[tomthebomb1968]

Think your channel list is not an updated one. Mutv is on 11307 V 27500 2/3

 

[tony13]

thnx guys for your replies,what I cannot understand that the channel list has been updated only a few nights ago,I have reloaded the channel list in my 7020 and everything is working ok ,in my 800 I can open everything inc all hd without any problems I think the problem is with the cam emu,I had the same problem opening these channels on my 7020 in the first place, then I found that newcamd 5.28 would open these channels without any problems,I have tried to load the newcamd in my 800 it loades ok, but I cannot see it in the blue menu,I think the newcamd is for the old egnima 1,can anyone give me any ideas which emu is nearest to the newcamd or if there is a subsitute I could use,in the ccam 2.09 with newcs everthing is opening except those channelsI know with the 5.28 I had to patch the cam also i had to add the box key to get it working ,but in 209 and newcs there is no where to enter any b/key or any other details,I know its a long shot but all I can do is ask.

regds tony

 

[tomthebomb1968]

You need to use a different channel list for enigma 2 boxes. If your using one for your 7020 thats the problem. Google for latest likra 800 settings

 

[tony13]

Thnx guys for all your replys,I still am having the same problem,I just cannot get these channels open on any of the cam emus I have tried, CLIMAX 1,2,3,also paul ramond tv, are the ones I am having problems with on 28 east,I can recieve all the other channels ok inc hd channels using my sly card but these channels just wont open,I have the latest channel list from likra,I have no problem opening them on my 7020 using newcamd but I know newcamd is not supported with 800 and egm 2,is there any thing I can do to get these channels open using mgcamd or ccam and newcs, I am using the latest image from nabilo 5 what i dont wont to do is keep switching cards from my 800 to my 7020 in the evenings just to watch these channels, is there some way I can edit the files to open these channels It was a problem with my 7020 till I found that newcamd was the only emu what would open these channels, realy need some help on this one please. I am realy totaly

regds

 

[tomthebomb1968]

Not a solution to get the 800 opening them, but what about leaving the card in the 7020 and sharing to the 800 permanently with cccam, dead easy to do, my relook serves all my boxes
1 fline and 1 cline is all you need to add to your configs

in the 7020 config
F: dream800 share

in the dream800
C: 192.168.0.* 12000 dream800 share yes
*is actual ip address of your 7020 and you have to open port 1200 in your router settings, usually these settings are got at by typing 192.168.0.1 in your browser, you may need to put in a username and password for your router

BTW the new Nabilo 0,5 is some piece of work, love their images, was worth the wait

 

[tony13]

tomthebomb1968 thnx for you advice,just 2 questions if you can answer for me,
(1) dont forget it s only newcacamd that will open these channels on my 7020 will I be able to see these channels on my 800 using ccam,at the moment I can open all the chanels using ccam execpt the ones I mentioned above,
(2) can I use both boxes on the same router using the same type of cables,I think they are cables I got with my router cross over.

regds

 

[tomthebomb1968]

Him8, All my boxes connect to my router with standard ethernet cables, 1 a standard 1 metre cable and the other a 10 metre.

I dont understand why these will not open with cccam, im not familiar with newcamd so i cant point you in the right direction, all i can say is that cccam opens all thats on my sky card and i can share it all with the config above.
Sorry

 

[tony13]

thnx m8 for trying to help me,I have managed to get the boxes talking to each other now with cccam but the above channels still wont open in cccam either on my7020 or my 800, 7020 is ok with newcamd 5.28 ,I would just like to say thnx anyway for your time and advice If its at all possible I will some how get it working other wise my 800 will have to go ,and I will have to find another hd box thats supports newcamd. anyway thnx for trying to help me.
regds

 

[sonic1]

@tony13,
I can not understand why you can not get CCcam to open these channels in your 7020, I have the same set up as you and have it working just fine.
Can you give some more info about your set up such images and which version of CCcam you are trying?
The other problem of HD channels not opening in your 800 is you need the latest images with the latest bootloader.

 

[tomthebomb1968]

Tony have a read here, How to get your 800 reading your sky card with blackhole v0,5

_http://www.nabilosat.info/forum/showthread.php?t=61162

 

[tony13]

Hi m8 thnx for yor reply,yes I have tried and I using newcs 162/cccam2.0.5 and I can open all the channels,when I press the blue button I can see all the info,on all my channels which are encrypted, the ones that I cannot open after 10pm show all the info when in the fta mode but soon as the broadcast starts using the blue button does not show any info on the channels I subscribe to after 10pm in the blue button mode, so I cannot view any of these channels,I decided to try and load newscs162 and 205 on my 7020 the same thing happens with that as well,the only way I managed to view these channels is using newcamd 5.28 with the 0961 patch, which cannot be used on my 800 I am totaly lost now and I dont know what to do,If your or anyone out there can give me any ideas I would be most grateful,it only those channels that just wont open I have everything inc all my hd working fine.

regds