sonnetpete
Grumpy Old Retired Moderator and quiz inquisitor..
- My Satellite Setup
- Laminas 1.2M fibre dish with an IBU, on a Clarke Tech USALS motor, covering 57E - 24.5W to an Octagon SX88. Displayed on a 20" Dyon LED TV.
Seperate 80 cm dish on 28E with a Humax Freesat for SWMBO.
Free Sat V8 meter. Sony Bravia 46" LCD, Sony BluRay and Home Cinema.
- My Location
- Normandy, France
......well not all the time but at my age I'm easily confused. I'm not happy with the Vantage receiver I have. It's interface is confusing and the remote is really cheap and nasty. Anyway, that's my excuse.
When I set up the satellites under the motor menu I had two choices for the LNB, Universal 1 (9750/10600) and Universal 2 (9550/10750) On 26°E I selected Universal 2 because it seemed to have a greater range. But then lately I couldn't understand why the channels were showing up on the wrong transponders.
I read a thread on here earlier today which mentioned checking the LO setting. I haven't a LO setting but swapped 2 for 1 if you see what I mean. All of a sudden I have correct TP frequencies and extra channels (Al Kass HD no less)
!!!
I call it a senior moment but it does prove you should RTFI.
When I set up the satellites under the motor menu I had two choices for the LNB, Universal 1 (9750/10600) and Universal 2 (9550/10750) On 26°E I selected Universal 2 because it seemed to have a greater range. But then lately I couldn't understand why the channels were showing up on the wrong transponders.
I read a thread on here earlier today which mentioned checking the LO setting. I haven't a LO setting but swapped 2 for 1 if you see what I mean. All of a sudden I have correct TP frequencies and extra channels (Al Kass HD no less)
!!!I call it a senior moment but it does prove you should RTFI.
