Startsat(150D) Upgrade

[jacobbec]

Dear Sirs,
i have upgraded successfully the Starsat SR X 150D plus with the new software posted (7 Dec 2005), but still i am not able to gain access to Multivision channels , what is still missing to do ? and what do they mean by PVR ?

Regards,
Yaacoub

 

[DeepDiver]

Multivision keys change on a daily basis, therefore you need to change keys every day.
The latest available patch at satdw.com only gives you the possibility to manually enter the new AES keys for multivision.
Browse the web for the AES keys.

Hope it helps

 

[jacobbec]

thanks a lot for your reply ,
i got one the AES KEYS in HEX , but i don't know how to load this key manually into the Starsat 150D plus ,for example let say i have the following HEX AES key:
00: RE AD TH ER UL ES
01: NO PO ST IN GO FK EY S!
01: AB AN IS SU RE TO FO LL OW YO UH AV EB EE NW AR NE D!
could you please guide me step by step how could i load this Key into the Startsat receiver SR-X 150D plus

Thanks a lot for your help and support
Yaacoub

 

[DeepDiver]

The AES key is composed of 32 digits, 16 pairs of codes.
Split the key in two groups of 16 digits each, 8 pairs of codes.
Enter the first 8 pairs to index 01
Enter the second 8 pairs to index 11

Hope it helps :-Cbigsmil

 

[jacobbec]

Thanks again for your reply ,
what i need to know is by which mean i have to enter the AES key ?
is there any software i have to use ? or shall is use the remote control of the Receiver ? if yes how can i do that ?
Regards,
Yaacoub

 

[DeepDiver]

Have a look here, this question has been posted many times, and if you use the search function, you find many answers.

It refers to srx200ci, but the procedure is the same for 150

http://www.satellites.co.uk/php-bin/forum/showpost.php?p=288760&postcount=5

 

[jacobbec]

i followed the procedure described but it reveals taht my Starsat 1SR-X 150D PLUS is not euipped with CI( Common Interface ) so i don't have VIACESS listed under menu ( i don't have such option).
my question is it possible to load the AES keys through serial port of the receiver , if yes how i could do that step by step ? and which program shall i use ?

Thanks again for your help and support

Regards,
Yaacoub

 

[DeepDiver]

VIACCESS will not be clearly listed under MENU

Do the following

Press MENU
Go to STB SETTINGS, but do not press OK
Press 1234
Now, a page with encryption system will appear
Choose VIACCESS
Find ID 007C00
Change ke*s to index 01 and 11

Hope it is now clear

 

[jacobbec]

thanks for your help
Regards,
Yaacoub