STRONG SRT4355 EVO jkeys

roller

Regular Member
Messages
11
Likes
0
#1
hi there,
does anyone have jkeys for strong srt4355 evo?
i am trying to jtag it but there is an error and it does not recognize the sti5518bvc.
any help plese
thanks
 
Messages
9
Likes
0
#2
When the MPU is not recognized from jKeys, than you can't do anything with the flash memory. There is a problem with your JTAG-interface - check it one more time.

btw, what is the flash memory in this model?
 

roller

Regular Member
Messages
11
Likes
0
#4
thanks john smith.

i have checked and rechecked my jtag and everything seems to be fine(but i know something is wrong), what is really strange is once when trying to connect to the receiver i actually did it! it recognized de mpu but it was that once!
do you think that there is a conflict with win xp service sp2?
 
Messages
9
Likes
0
#5
I don't think it's a problem with WinXP SP2 - I have it too and there is not problem. May be the settings of the LTP-port? Or the cable between the JTAG and the STB is too long? I think, it shouldn't exceed 15-20cm...
Someone with more experience out there?...
 

roller

Regular Member
Messages
11
Likes
0
#6
thanks a lot for the reply!
now i've menage to connect it to mpu! it recnognizes the 5518 it reads the flash but does not let me to erase or program it!
any ideas please??????
thanks
 
Messages
9
Likes
0
#7
You schould run Wall.exe just after the window from jKeys, that tells you to switch the stb off, than on and (but that windows stays open, so don't click OK yet);; than click "OK" on the error-message from Wall (just ignore it, it's normal), and leave wall running. Return to jKeys and now click "OK". I have to do this sometimes a few times.
Hope that it helps ;)

Smith
 

roller

Regular Member
Messages
11
Likes
0
#8
thanks john smith!
i am trying to do that without success!
but can you please tell me wich ird model you select after jkeys identify the cpu, because it says "unknown"(i bet it has no importance!).
this receiver is driving me crazy!!!!!!!!!!!!
thanks for your help.
 
Messages
9
Likes
0
#9
Oh, the IRD model is very important... When you choose an IRD, than jkeys knows what kind of flash memory is in it and what is its structure (that is defined in the defininition file - jKeys.def). So if you don't have an entry for your STB in this file, you have to edit it... What is the flash-memory in your Strong? Eventually you can choose another model in the list, that has the same CPU and flash (you can find it by opening the Jkey.def in Notepad).
 

roller

Regular Member
Messages
11
Likes
0
#10
thanks john smith,

in the jkey i am using no matter what ird i choose the the flash is always the same(M28W160CT) that's why i'm saying it has no importance!
any way i was told that i cannot write ou program the memory because it's protected! the question is how to overcome the problem!
thanks for your help!
 

Topper

Amo Amas Amant Admin
Staff member
Messages
21,731
Likes
3,311
My Satellite Setup
IDD CI24 ECONO MM Penta 1.20 Galaxy II
1.2Mtr Polar MTG yes it has been on the arc for 25 years and is now fixed on 13 East using two pairs of rusty molegrips. Unlike me they never groan but always perform.
My Location
Blackburn, Lancashire
#12
roller said:
thanks guys for you help! the problem is solved!
Are you going to share it with the other members of the forum??? :rolleyes:
 

roller

Regular Member
Messages
11
Likes
0
#13
i could not attach the files needed to explain how to do it!
if you need any help please let me know!
 
Messages
1
Likes
0
My Satellite Setup
dell xp pentium 4
Strong 4355 evo
My Location
Italy
#14
roller said:
i could not attach the files needed to explain how to do it!
if you need any help please let me know!
Hi!
I got a dead 4355 strong evo..... the same problems just like you.
Can you help me???? (files needed to explain how to do it!)

Thank you
 
Messages
1
Likes
0
My Satellite Setup
Fonestar RDS-540
DreamBox 500s
GBox 2.1b
My Location
Macedonia
#15
roller said:
i could not attach the files needed to explain how to do it!
if you need any help please let me know!
i need your help
i managed to connect but i need def file because i can't do anything to the M28W160 (srt4355 Evo)
 
Messages
1
Likes
0
My Satellite Setup
Astra7000
Pentium 4 hp
My Location
Egypt
#16
Please, provide the last upgrade software of reciever Astra
H/W : 100
ID: 128E
Thanx
 
Top