Strong STR 3610

Messages
6
Likes
0
My Satellite Setup
Pent 366

strong SRT 3610
My Location
australia
#1
hope someone can help me

l was trying to upgrade firmware and channel list for my srt 3610 all seem
to load up ok and come back succ on the unit, but now when l try to switch
the unit on it will not come out of standby mode it is as if the front end
loading program is gone.



If l connect the pc back to the unit it still will upload the firmware and
channel list but nothing else happens still will not switch on stays in
standby mode unit it;s as if it;s looking for something as it;s meant to go
to off and then you can switch it on but it;s stuck, Not power supply as it
was test with a working unit.

worked fine until l try to upgrade...

Thanks

Frank
 

rolfw

Believe it when I see it Admin.
Staff member
Messages
37,710
Likes
1,288
My Satellite Setup
Technomate 5402 HD M2 Ci, DM7000s, Transparent 80cm Dish, Moteck SG2100 DiseqC motor, lots of legacy gear. Meters: Satlook Digital NIT, Promax HD Ranger+ spectrum analyser.
My Location
Berkshire
#2
Have you tried putting the old firmware back on?
 
Messages
6
Likes
0
My Satellite Setup
Pent 366

strong SRT 3610
My Location
australia
#3
no as l didn;t back it up nor do l know where l can get the old one
 
Top