T K BRACKETS size
- Thread starter den123
- Start date
Lazarus
Retired Moderator
- My Satellite Setup
- 80cm Motorised.
Several small Dishes.
Much else.
- My Location
- North York Moors
Even with 12" T&K, in your circumstances you should be able to track 60 degrees East and West without issue, assuming you are going to use a generic H-H DiSEqC Motor (Which, of itself, increases the standoff from the wall).
Using bigger T&K will look ungainly and add no value.
Using bigger T&K will look ungainly and add no value.
Lazarus
Retired Moderator
- My Satellite Setup
- 80cm Motorised.
Several small Dishes.
Much else.
- My Location
- North York Moors
For increased stability - to save maintenance trips up to the mounting point - you might consider TTK or TKK.
ie A third bracket suitably placed.
Which of those two configurations is best has been debated many times. My own view is that either will do, but others might well disagree!
ie A third bracket suitably placed.
Which of those two configurations is best has been debated many times. My own view is that either will do, but others might well disagree!
Vipersan
Emmett Browns Ghost
- My Satellite Setup
- IP9000HD +
TD110 Dish and TD88 Dish in Tandem
66°East to 60°West.
AZbox PrmHD + OpnbxS9HD + Skybox + DrHD F15
2x VboxII AZ-EL
2 m+ Alcoa PF + BSC421 C-Band lnbf...
+SS2/TwHnS2-3200 pci/TBS6925 pci
1.5 Fortec Star -Gbox - HtoH Ku/Ka/C
- My Location
- UK
Got 2 dishes on usals motors on one long pole ...mounted on 2 Ts and 2 Ks . It goes T -K- K- T ..12 inch stand off ..
TD110 at the top ..Orbital 1m midpoint (which is down for maintainance atm)
60E to 60W ...but the Troublesome Tree masks part of the lower Orbitals Eastern arc..
rgds
VS
TD110 at the top ..Orbital 1m midpoint (which is down for maintainance atm)
60E to 60W ...but the Troublesome Tree masks part of the lower Orbitals Eastern arc..
rgds
VS