T*S + Prem*ere MGcamd v1.23

newgen2005

Dream-Believer
Joined
Jan 30, 2006
Messages
249
Reaction score
2
Points
18
Age
46
My Satellite Setup
LG 60" 3D Plasma TV
Thomson SKY+ HD
My Location
Guernsey Channel Islands
T*S and Prem*ere are working with MGcamd v1.23:)
 
A

Anonymous-A

Guest
Do I need to do any backend configuration or is it simply a case of installing the cam and that's it?
 

PJ02

Regular Member
Joined
Nov 29, 2006
Messages
150
Reaction score
0
Points
0
Age
44
My Satellite Setup
1.2m CM, 36v Positioner, DB7020Si.
Diablo, CAS3+
My Location
Cheshire
Install cam, change the conf file to AU on TPS think it's 4.
Upload keys sit on France 4 for a min.
Enjoy TV.

Rgds

PJ
 
A

Anonymous-A

Guest
Thanks for that, I can get France 4, France 5 and ARTE to work with MGcamd but not the others.

SBCL/vplug works fine though :)
 

bob-1

Regular Member
Joined
Jan 13, 2007
Messages
87
Reaction score
0
Points
0
Age
55
My Satellite Setup
DM 7025+s-t
Raven gemini 70 ,13e,19e,28e
85cm Transparent dish Moteck SG2100 and inverto black ultra lnb.
My Location
UK,Sheffield
Working on mine using dccamd.
 

brewby

Regular Member
Joined
Oct 31, 2004
Messages
154
Reaction score
0
Points
0
Age
69
PJ02 said:
Install cam, change the conf file to AU on TPS think it's 4.
Upload keys sit on France 4 for a min.
Enjoy TV.

Rgds

PJ

Hi m8 how do I change the config file to AU on TPS, where do I change it to 4

Regards
 

PJ02

Regular Member
Joined
Nov 29, 2006
Messages
150
Reaction score
0
Points
0
Age
44
My Satellite Setup
1.2m CM, 36v Positioner, DB7020Si.
Diablo, CAS3+
My Location
Cheshire
In mg_cfg edit to look like below.

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
U: { 04 }

Rgds

PJ
 
A

Anonymous-A

Guest
Put on the DB after work - I've got T*S, P******e and A*S*T now! A reboot did the trick. :)
 

PJ02

Regular Member
Joined
Nov 29, 2006
Messages
150
Reaction score
0
Points
0
Age
44
My Satellite Setup
1.2m CM, 36v Positioner, DB7020Si.
Diablo, CAS3+
My Location
Cheshire
Excellent news, glad you've got it working.

PJ
 
A

Anonymous-A

Guest
Grrr...

I can still get P******e but no T*S...

T*S pops up for 30 seconds or so everyonce in a while and goes again.

So here's what I've done so far:

1:Downloaded and installed the Satan Key Bundle.
2: CHMODed the files to 755
3: restarted the DB
4: Tuned to France 4 on 13E
5: T*S occasionally decrypts goes black shortly after
6: O*F and P******e decrypt fine.

What am I not doing right?
 
A

Anonymous-A

Guest
Since I can't edit my post, I wanted to add that I'm using MGCamd 1.23 for T*S...
 

Llew

cerca trova...
Staff member
Joined
Jan 1, 2000
Messages
16,226
Reaction score
4,197
Points
113
Age
81
My Satellite Setup
Triple Dragon, Dreambox 8000, Echostar AD3000ip, TBS6522,6925,6983 PCie cards.
Gibertini 1.25m motorised dish driven by the AD3000, with either Inverto BU Quad or Norsat / XMW Ka LNBs . SMW 1.05m + 3 other dishes. Speccy: Promax HD Ranger+
My Location
The Flatlands of East Anglia
Try removing t*s.au from your key file. May be an old one. Then go to France 4 again to allow updating au.

Llew
 

T_G

The Consumate Dreamer
Staff member
Joined
Jan 1, 2000
Messages
6,693
Reaction score
241
Points
63
Age
58
My Satellite Setup
1 GigaBlue Quad plus, 1 Dreambox 5620, MOTECK SG2100A DISEqC Motor, 120 cm noname offset dish, Humax 95 cm offset dish and a few UK digiboxes.
My Location
Somewhere where the Sauer is Kraut and the Wurst is Brat
Yeah, Llew is right. You might want to do the following (provided you got the Gemini image): Go to the blue button, addons, delete and remove all the cams and cam configs. Then go to your FTP prog and delete everything in the var/keys and Var/scce. Reboot Dreambox.
Go to the blue button and download the latest MGCamd124, and the camconfig. Get the satanbundle and insert it to the right places and it should work.
You might want to install the Satandream Updater plugin as well, make a search for it, it's somewhere in the forum.
 
A

Anonymous-A

Guest
OK, I'm back from work now. I deleted the t*s.bin and t*s.au files in my Keys directory and downloaded a newer T*S.bin file. Now I've got it working without having to use SBCL to "pump" my DB and so far TF1 has been running OK for the last 15 minutes.

I've made sure MGCamd 1.24 is my Cam for T*S and all seems well!

Thanks for all your input and now I'm off to investigate Cron for those auto updates...!
 
Top