Tommy Wylie
Regular Member
- Joined
- Jun 9, 2016
- Messages
- 22
- Reaction score
- 0
- Points
- 1
- Age
- 59
- My Satellite Setup
- Technomate TM-5400 CI+ M2 USB
- My Location
- Scotland
My Technomate, which I bought second hand, has just been set up with a dual LNB. It worked OK in the earlier part of the day although a lot of channels said "No video/audio", despite having a reasonably strong signal.
I then switched it off via the remote control before going out, and on my return I cannot get it to switch on at all. There is however some black video signal which stops my TV from saying "No signal", so something must be happening. However the display on the front is black, no life seen anywhere. I've tried unplugging it and plugging it back in again, but it is still not lighting up on the front and still not putting out any signal except black video output. None of the buttons on the front do anything.
I then switched it off via the remote control before going out, and on my return I cannot get it to switch on at all. There is however some black video signal which stops my TV from saying "No signal", so something must be happening. However the display on the front is black, no life seen anywhere. I've tried unplugging it and plugging it back in again, but it is still not lighting up on the front and still not putting out any signal except black video output. None of the buttons on the front do anything.