TNTSAT card not working on CCCam2.1.3

[Anonymous-A]

Folks, my TNTSAT card has not worked for the last couple of days - is there a general problem out there? I have not made any changes to my Dreambox 800HD config. I'm running the Nabilosat blackhole image.

 

[Anonymous-A]

TNTSAT cards have had a new AES code and none of the current CCCam versions can now decode TNTSAT on their own. Pending an updated version of CCCam the recommended route is to use the latest Oscam server with CCCcam as a client. In my case I had to reflash my DM800 to the latest Gemini image to get the latest Oscam! TNTSAT now works on my re-flashed box.

 

[jmnil]

Hypercam is also working on some DM (depending on model and image).

For oscam you may need to put the AES key in one of the config file. Let me know if you want more datail (available on french forum).

 

[Anonymous-A]

It's in the oscam.server file. Here's an example:

-oscam.server
# reader configuration
# internal reader
[reader]
label = tntsat
protocol = internal
device = /dev/sci0
group = 1
caid = 0500
AESKey = ef3cb8d36xxxxxxxxxxxxxxxxxxxxbe3

The actual AES key can be googled.

 

[A nonymous]

I wouldn't hold your breath its gone black again

Mine stopped decoding this morning. It was OK when i was watching France2 last night, now nothing.

Hopefully its just an AES key chnage and not the ECM Parsing that has changed.

:-beer

Nano

 

[easysat]

I wouldn't hold your breath its gone black again

Mine stopped decoding this morning. It was OK when i was watching France2 last night, now nothing.

I just checked my set-up and Hypercam 2.04 and 2.05 are working fine with a DM7000S with Gemini.

 

[A nonymous]

Its back on again now


I would say they are testing and that something major is going to happen soon as it looks like they have been playing with the encryption again :mad:

 

[Anonymous-A]

The current situation as I know it is that Hypercam 2.06 will decode SD TNTSAT with the right AES key in the setup - does anyone know if it is possible to decode the HD TNTSAT channels yet?

 

[jmnil]

The current situation as I know it is that Hypercam 2.06 will decode SD TNTSAT with the right AES key in the setup

I don't know if the key is required but I know that hypercam is workng fine on SD.
I am usng oscam and I had to put the AES key in the setup.

does anyone know if it is possible to decode the HD TNTSAT channels yet?

No! The AES key for HD is still unknown.