TPS / Fun 6 in 1

E

englishman64

Regular Member
Messages
72
Likes
0
#1
Until recently I was able to access TPS via my Fun 6 in 1 on my Humax 5400
Can I assume its a simple code change and I will just need to progam the new ones in.
If so where can I find the relevant file as I am having no luck
Cheers
Mick
 
Analoguesat

Analoguesat

Administrator
Staff member
Messages
46,055
Likes
8,570
Location
Scottish Borders
My Satellite Setup
TM 5402HD
Skybox F3
Sky+ UK.
My Location
Scottish Borders
#2
Its more than a simple code change, if you check out other posts from the last 48 hours, you will see more details. Currently only back on certain cards & cams.
 
E

englishman64

Regular Member
Messages
72
Likes
0
#3
OK
I understand that but does that mean that I might be able to repogram my card at some point or has that facility been lost
 
L

Low Profile

Regular Member
Messages
364
Likes
0
My Satellite Setup
DM800HD, DM7000 80GB HD with Asus WL330 wifi + 2GB usb drive, Skystar2.3, 2.2m Kinhuge Dish with Inverto LNB and Invacom ADF-120 feedhorn. Pace 1.3.25 and 80cm for Sky.
My Location
Lot, Dordogne, Correze border.
#4
The rdi-sat board has a TPS fix listed for the 5400.
 
E

englishman64

Regular Member
Messages
72
Likes
0
#5
I did see the file on RDI-SAT but still no joy.
My questions is: is there a standard hex file out there that I can program my 6 in 1 card to work on my Humax 5400 or do I need to do something else too.
Thanks
 
Channel Hopper

Channel Hopper

Suffering fools, so you don't have to.
Staff member
Messages
26,024
Likes
5,889
My Satellite Setup
A little less analogue, and a lot more crap.
My Location
UK South
#6
I dont think a Fun 6 in 1 on its own could ever work with TPS as it stands now, so I would recommend you look at getting a null modem lead , and install new firmware into the receiver.
 
Top